Liquid Rubber is a unique product that has a successful track record in the world market for over 20 years. It is the only LIQUID EPDM in the world. Liquid rubber has a resistance for the extremes of temperature.
Liquid Rubber coating has 300% elasticity. Liquid Rubber forms a waterproof and seamless coating immediately when applied. It will even standup to a light shower even when the material is still drying. Liquid Rubber retains its specifications even in extreme temperatures. Liquid Rubber will take temperatures from -60 to 300 degrees. It is resistant to UV and Ozone, can be used with full confidence on places that are exposed to constant sunlight. Liquid roof features very high flexibility and crack-bridging ability.
Liquid Rubber is a high performance emulsion to seal roof leaks. Both components of liquid rubber are waterborne & applied using a specifically designed delivery system to create a seamless membrane.
Liquid Rubber is a protective coating. Liquid Rubber is based on environment friendly, reliable and durable high quality materials.
Difference Between Liquid EPDM and other Materials.
- Identical to sheet EPDM but a liquid
- Easy Application
- Goes on virtually all surfaces
- Can be applied 6 times thicker than the standard elastomeric
- Single coat application
- Forms a seamless membrane
- Takes Temperatures from -40 to 300F
Features and Benefits of Liquid Rubber
- Easy to apply single coat system
- Instant set – Reduces project time
- Spray, Brush or Roller applied
- Easy to apply single coat system
- Water based – No harmful vapour
- Extremely flexible – Allows for substrate movement
- Seamless – No laps or joints
- High puncture resistance
- Strongly bonded to substrate
- Allows freedom of architectural design
Liquid Roof Application
- Roof & wet area waterproofing & re-fit construction
- Damp proofing
- Concrete & metal protection
- Corrosion control
- Retaining walls, planter boxes, between slab, tanking & foundation protection
Uses of Liquid Rubber
Liquid Rubber provides an easy to apply seamless waterproof membrane that meets the ever increasing requirements of environmental and health and safety considerations.”
Liquid Rubber was developed to address the recurring problems encountered by roof leaks. Our products are state of the art, with respect to today’s environmental concerns and safe working practices.
Liquid Rubber may be applied on rv roof, roof decks, metal roofs, gutters, structural steel, air conditioner enclosures, cooling towers, galvanized steel, unit heater flues, smoke stacks and chimneys, fiberglass and non porous masonry surfaces. Liquid Rubber is excellent for wood, canvas, cement, or metal roof repair over large surface areas.
Metal – Coated or Galvanized Steel Weathered Aluminum
EPDM Rubber membrane
Concrete (except foot traffic surfaces)
PVC Sheet and Pipe
Sponge Rubber insulation
EPDM Rubber Membrane on flat or sloped Roofs
Weathered Steel Siding
Weathered standing seam and corrugated metal roofs
Weathered Vinyl, PVC and Polycarbonate plastic
Foam insulation for pipe
Cast Concrete foundations
If Neoprene rubber has been Talced then this should be removed by washing with detergent or wiping with solvent soaked rag. Liquid Rubber can be applied directly to Neoprene. Some swelling of the Neoprene should be expected but this will recover over time. The distortion resulting from the swelling will be greater if Neoprene is thin and not adhered to a rigid substrate.
A light sanding of the surface is recommended for better adhesion. No swelling will occur.