A Brief History of Roofing Materials

A complete history of roofing materials would start in the Stone Age. Popular modern material has not been around quite that long but even clay roof tiles have been in use for thousands of years.

Of course the manufacturing processes have changed and improved. People are no longer limited by the location of the material. That was a major factor to consider before present-day shipping methods were introduced.

Clay tiles are popular in some areas and for some architectural designs. The tiles are more expensive than other options but they are long-lasting. Shingles are a far more popular choice.

The history of modern shingles is not nearly as long as that of clay. Wood shingles or shakers were used until insurance companies started refusing to insure homes and businesses with roofs covered by them.

The first composite roof material was used in the 1840s. They are referred to as composites because they are composed of two or more substances, rather than a single material. Modern shingles are composites but the first composite roofs bore little resemblance to the ones we use today. Also there are lots of roofing materials like Liquid EPDM Coatings, liquid roof and liquid rubber coatings are available in the market for fixing roof leaks.

The substances used in the earliest composites were felt or woven fabric, pine tar and sand. Improvements were made by saturating the fabric with asphalt and substances such as sand, crushed limestone or talc. Coal tar came next in the history of roofing materials.

Coal tar is a byproduct of coal manufacturing processes. It was not until the introduction of gas lighting for city sidewalks that enough of the byproduct was generated to find an application in the roof industry.

The coal tar was mixed with fine gravel and rolls of felt were saturated with it. The rolled material was then attached to roofs. Asphalt shingles soon replaced the rolled material.

Henry M. Reynolds made a significant contribution to the history of roofing materials. He came up with the concept of shaping the earlier asphalt-coated roof fabrics into individual shingles in 1903. Reynolds was a roofer and manufacturer. The first shingles he produced were hand cut with a sharp knife.

In 1914, F.C. Overby began adding crushed granules of slate to add weight to the shingles and keep them from blowing off the roof. Roller-die cutting machines were perfected the following year making the mass-production of shingles more practical. Most of the changes that have occurred since that time have been decorative, except for the use of fiber glass to reinforce the felt fabric, which occurred in the 1970s.

That is a very brief history of roofing materials that are very helpful for repairing roof leaks. Liquid EPDM Rubber and Liquid Roof coatings are the best roofing products that will give you cost effective solution for your roofing problems. Although there are other choices, composite shingles are still the most popular for homes.

For product information or ordering visit EPDM Coatings or call them at 855-281-0940855-281-0940.

  • [email protected]

    It can be difficult to repair a flat roof but a liquid roof coating is a good way to do it.

  • Roofing Company

    The best roofing companieswill always have the best materials, including the newest in green materials, available for their customers. Always be sure to inquire about the types of material to be used!