Tips for Applying Your Elastomeric Roof Coating

Are you chockfull of the DIY spirit? Are you ready to take on your roof and apply your own roof coatings? It’s cheaper and easier than hiring a professional, and once you see just how simple it is, you’ll understand why you can do this on your own. The EPMS liquid coating will work well with a number of different types of services, including metal, concrete, urethane, and more. Let’s look at just what you need to do to get going.

When Should You Do It?

While it’s common sense for most people, it does bear repeating that there are certain times that applying the liquid roof coatings is not a good idea. You want to apply the coating on days when it is warm and sunny, as this will help it to dry and cure far more quickly. Avoid applying the coating if it recently rained or if there is rain forecast in the near future. You want to avoid moisture at all costs.

Clean the Roof Surface

The first step is always cleaning. You need to clean the roof surface extremely well to make sure the roof coatings will adhere. Start by removing the larger debris. Then sweep away some of the smaller dirt and gunk from the roof’s surface. Even though it might look nice and clean now, it’s not. It’s still a good idea to use a power washer to ensure that you have everything off the roof.

Check for More Issues

At that point, it’s time to inspect the roof for any cracks and blister areas. If you see any of these, and they are not too bad, you can use a patch repair kit to take care of them. If they are out of control, then you may actually want to work with a professional once you take note of the condition of the roof and are satisfied.

Applying the Roof Coatings

You will find that applying the coating is actually very similar to applying paint. In fact, you will be using many of the same tools for the job. For example, you will use a roller and a long handle to apply the coating to the bulk of your roof. You will then use the brush for some of the finer detail work, and to make sure you get into the corners and cracks properly. You will apply a single coat to your roof, and then you are done.

The only thing that you have to do then is to wait for it to dry and cure. Keep in mind that these are not the same thing. The roof may dry within a day, but it will not actually set in and cure for several days. In fact, if the weather is wet, it can take weeks for it to cure.

Roof restoration and sealing really can be quite easy, as you can see. However, that doesn’t mean that you have to do it on your own if you don’t feel comfortable. You can still have help from the professionals.

The Benefits of EPDM Roofing

With so many options on the market for you to choose from in terms of roofing solutions, knowing where to start is difficult, but figuring out which option makes the most sense can be simple. The good news is that EPDM roofing has been making this decision easier for years now. People who know about this solution don’t have to spend countless hours trying to figure out which one to go with because EPDM makes it so simple. Consider the following benefits they bring to the table.

Perfect for All Climates

Some roofing options look great. They may even hold up too, so long as you live in a temperate climate that won’t throw any surprises your way. Otherwise, that new roof will quickly become more of a burden than anything.

EPDM roofing, though, works well in any environment you can imagine. Both black and white options look great too. Buildings that benefit from EPDM can be located in the hot, humid climate of the American south, where torrential rain and high winds often emerge. The material is just as at home in the freezing north as well, though, where the sun can still be plenty brutal all year round.

Saves You Money

Speaking of tough climates, no matter where in the country you live, you’ll love what EPDM roofing will do to your utility bill. That’s because an EPDM roofing system creates a virtually impenetrable seal that won’t let the outside world in. This seal is created by overlapping the sheets of EPDM and then gluing down their seams.

However, this also means that your building won’t leak air through the roof either. This is especially helpful in extremely cold locations where you could be spending a small fortune on heat that then escapes out the top of your building.

Easy to Repair

Chances are you won’t ever have an occasion where your EPDM roofing is in need of repairs. If that should happen, though, you won’t find an easier type of roofing to fix. For one thing, most EPDM roofing solutions come with lengthy warranties. Don’t be surprised if yours is for around 20 years.

However, even if you do need repairs, it won’t take long or cost much. Due to the way the EPDM is applied to your roof, the damaged strip just needs to be removed and then replaced by a new one. It’s adhered to your roof like before and that’s that.

Again, though, the high tensile strength and overall durability of these roofing solutions makes it very unlikely ongoing maintenance will be much of a concern. The findings of a an EPDM Roofing Association (ERA) inspection of roofs with EPDM that were over 30 years old found that the material was still very strong.

You could spend a lot of money on all kinds of roofing solutions and still end up very disappointed. It could also mean spending more money and time later getting it replaced. On the other hand, go with EPDM roofing and you’ll find that quality material doesn’t have to be costly or inconvenient