How You Should Handle Your Next RV Roof Repair Job

A lot goes into making an RV road-worthy and comfortable. While it takes all kinds of different parts, it should go without saying that the roof is essential. Even the tiniest of leaks could become a big problem if you don’t quickly repair it with EPDM.

EPDM Is Long Lasting

The only thing worse than having to handle RV roof repair because of a pesky leak would be going to the trouble of fixing the problem only to have it happen again. Too many RV owners have had to go through this. They think the problem is history. Then they hit the road. As soon as it rains again, they realize they were mistaken and are now too far away to do anything about it.

You can rest assured that EPDM will take care of the leak once and for all. Chances are you’ll never have to handle an RV leaks repair job in that area ever again.

Simple Application

If you pay someone to take care of your RV roof repair needs, it can be still be pretty affordable if they use EPDM. That’s because this form of RV rubber roof repair is so easy to apply there will be minimal labor costs to cover.

This means that it’s also easy to handle on your own. You can find all kinds of EPDM products these days. Most just require you to spray them over the problem area. Then just wait for it to dry and you’re good to go. Larger leaks may need a version that is applied more like paint, but it still won’t require much time and you definitely don’t need prior experience using it.


Like we just touched on, EPDM is extremely affordable, even if someone else applies it for you. Depending on the size of your leak, you should be able to fix the problem and still have plenty of the rubber left over in case you ever need it again.

Little-to-No Maintenance

Just like you don’t want another leak springing up after you went to the trouble of fixing the first one, you also don’t want to spend hours of your life going forward making sure that your repairs will stick.

Fortunately, EPDM is extremely low maintenance. In fact, cleaning the area is basically all it takes to keep any recurring problems from being an issue. It doesn’t take much, though, so just hit the area like you normally would when you wash your RV and you should be fine.

Preempting Problems

If you want to make sure that needing an RV leaks repair job never becomes necessary, your best bet would be to use EPDM beforehand. Again, it’s extremely affordable, so you won’t have to break the bank to cover the roof of your RV with the material. This coating won’t just keep the rain out, though. It will also keep the sun’s rays at bay and your A/C inside where it belongs.

RV rubber roof repair is the way to go when you get a leak. Just be sure it’s EPDM and that you handle the job right away.

The Benefits of EPDM Roofing

With so many options on the market for you to choose from in terms of roofing solutions, knowing where to start is difficult, but figuring out which option makes the most sense can be simple. The good news is that EPDM roofing has been making this decision easier for years now. People who know about this solution don’t have to spend countless hours trying to figure out which one to go with because EPDM makes it so simple. Consider the following benefits they bring to the table.

Perfect for All Climates

Some roofing options look great. They may even hold up too, so long as you live in a temperate climate that won’t throw any surprises your way. Otherwise, that new roof will quickly become more of a burden than anything.

EPDM roofing, though, works well in any environment you can imagine. Both black and white options look great too. Buildings that benefit from EPDM can be located in the hot, humid climate of the American south, where torrential rain and high winds often emerge. The material is just as at home in the freezing north as well, though, where the sun can still be plenty brutal all year round.

Saves You Money

Speaking of tough climates, no matter where in the country you live, you’ll love what EPDM roofing will do to your utility bill. That’s because an EPDM roofing system creates a virtually impenetrable seal that won’t let the outside world in. This seal is created by overlapping the sheets of EPDM and then gluing down their seams.

However, this also means that your building won’t leak air through the roof either. This is especially helpful in extremely cold locations where you could be spending a small fortune on heat that then escapes out the top of your building.

Easy to Repair

Chances are you won’t ever have an occasion where your EPDM roofing is in need of repairs. If that should happen, though, you won’t find an easier type of roofing to fix. For one thing, most EPDM roofing solutions come with lengthy warranties. Don’t be surprised if yours is for around 20 years.

However, even if you do need repairs, it won’t take long or cost much. Due to the way the EPDM is applied to your roof, the damaged strip just needs to be removed and then replaced by a new one. It’s adhered to your roof like before and that’s that.

Again, though, the high tensile strength and overall durability of these roofing solutions makes it very unlikely ongoing maintenance will be much of a concern. The findings of a an EPDM Roofing Association (ERA) inspection of roofs with EPDM that were over 30 years old found that the material was still very strong.

You could spend a lot of money on all kinds of roofing solutions and still end up very disappointed. It could also mean spending more money and time later getting it replaced. On the other hand, go with EPDM roofing and you’ll find that quality material doesn’t have to be costly or inconvenient

Using EPDM for Roof Coatings

No matter what kind of building we’re talking about—commercial or residential—you should always look to further optimize its operation. This may mean renovating the inside, changing out its HVAC system or installing new floors. However, roof coatings are one of the best ways to get more from your commercial building or home, so long as you choose the right product for the job. While countless materials exist, EPDM is by far the best for roof coatings.

Ethylene Propylene Diene Monomer

EPDM stands for Ethylene Propylene Diene Monomer (it’s also an M-class rubber). This synthetic form of rubber is made from the three listed, which come from either natural gas or oil. Over the years, EPDM has become one of the most widely used forms of rubber and for good reason. However, you can expect to hear about even more uses for EPDM other than roof coatings and various other applications as science is constantly discovering ways to push what it can do.

The Beauty of Roof Coatings

Roof coatings can be used to fortify an existing structure or handle needed repairs if your home or building has recently been damaged. The great thing about using coatings for the job is how easy they are to apply. Considering most people can probably apply roofing sealants—including EPDM—this is truly a DIY solution.

Yet despite how easy it is to coat your roof, thanks to EPDM, you can still receive a number of benefits in return.


Greater Durability

For one thing, using EPDM means your building will be better protected from the elements. Even if you just need the synthetic rubber to make repairs or for an entire roof restoration, the finished product will give you a building that is even better off than before the damage happened.

EPDM can hold up under extreme duress brought on by the environment. It’s been tested between -40 and 300 degrees Fahrenheit and proved capable of remaining intact. While it’s unlikely your building will ever be put under a similar test, you can rest assured that it will be more than able to defend against whatever your yearly climate throws at it.

Improves Utility Bills

Depending on how large your home or commercial building is, you may spend a small fortune every year just on utility bills. If that’s the case, you’ll have one more reason to look forward to an EPDM coating on your roof.

The reason why EPDM does such a good job of keeping the elements at pay is because of the impenetrable rubber membrane it forms over your roof. Doing so also means that the sun isn’t able to make your AC unit work overtime to keep everyone cool. Furthermore, all that cold air won’t be slipping out the roof either. As heat rises, this is also a great way to keep your building nice and warm during the winter, instead of paying for hot air that will escape out the top.

If your roof could use a little help, a coating of EPDM is always a good choice. For all the reasons listed above and many more, this form of rubber will not let you down.

5 Must Know Tips for Successful RV Roof Repair Project

RV roofs are lightweight, durable and resistant to the elements, but that doesn’t mean they’re impenetrable. It actually takes surprisingly little to damage your RV’s roof. Strong winds might blow a branch down, punching through the roof and creating a serious leak. Over time, mold and mildew might compromise your roof’s integrity as well. RV roof repair can be tricky, particularly if you’re doing it yourself, but there are several tips that can make the process easier.

RV and Motor Home Roof Leaks

RV and Motor Home Roof Repair Project

RV Roof Tip-1 : Find the Leak First

Your leak might be obvious. That branch sticking out the top of your RV? That’s the most likely culprit. However, it’s also possible that the source of the leak isn’t that obvious. If that’s the case, you’ll need to get up on top of the RV to inspect things. If your RV is older, chances are it has a metal roof. However, if it’s a newer model (manufactured within the last 10 years or so), it probably has an EPDM (rubber) roof. Don’t walk on metal roofs without first putting down supports – plywood slats work. EDPM roofs can be walked on with care.

RV Roof Tip-2 : Find the Defect

There’s a difference between RV leaks repair and just sealing leak temporarily. If there’s a defect causing the leak, such as a puncture, you’ll need to make an actual repair to the underlying structure of the roof. If the rubber coating over the roof is damaged, you can use RV rubber roof repair to seal it. If there’s a defect or damage, repair it first, then seal the damaged area with RV roof repair rubber.

RV Roof Tip-3 : Small Leaks

If you notice a very small water leak from your RV’s roof, you can handle it without too much trouble. These leaks generally involve nothing more than a minor problem with the rubber roof or one of the seals. In these instances, a couple of coats of RV rubber roof repair sealant will be all that’s necessary. However, before you do anything, make sure the leak really is minor.

RV Roof Tip-4 : A Note on Bubbling

It’s normal to see some bubbling on your RV’s roof. However, that doesn’t mean these are defects or flaws. Rather than trying to cut out the bubble, just repair the leak. Bubbles will usually go away on their own over time. In fact, it’s somewhat normal to see bubbles form in the rubber leak repair material itself. These will shrink and disappear shortly.

RV Roof Tip-5 : Buy the Right Products

As a final note, you should make sure you’re actually buying products made for RV roof repair. There are products designed for residential and commercial use that are similar, but you need to make sure that you’re purchasing rubber roof repair material designed for use with RVs. RVs uses EPDM roofing material, and it takes the right type of material to repair leaks here.

RV roof repair doesn’t have to be time consuming or difficult. A handy owner can usually tackle basic RV roof repair needs on their own. However, know when a problem is too big for you, and get professional help.

For complete training and guide see RV Roof Repair Training Video.

The Advantages of EPDM Roof Coatings

There’s no getting around the importance a roof plays in any structure. Whether it be a home, a warehouse, office building, etc. you need a strong roof that can provide shelter from the elements. Leaks do happen, however, at which point, you want to act fast to solve the problem. Despite all the options available, you can’t do much better than having EPDM roof coatings above your head. Keep reading to learn why applying EPDM to your roof is one of the best decisions you can make for the structure.

Immune to Most Climates:

EPDM roof coatings can handle just about any climate condition short of a tornado. They can withstand low temperatures all the way down to -40 F without cracking or becoming brittle.

If you live in the Southern Hemisphere, you’ll be glad to know that a roof covered in EPDM doesn’t mind the warmth, either. While temperatures will never get up to 300 F, EPDM has shown it wouldn’t be a problem if it did.

The really great thing about EPDM roof coatings, when it comes to climate, is how much it can save you in energy costs. EPDM gets a lot of credit for keeping the elements out, but the truth is that it does just as good a job keeping your cold air or heat in, where it belongs.

Repair and Maintenance:

Roof Leaks Repairing

Roof Leaks Repairing

As the above attests, a roof covered in EPDM will have an easy time withstanding the elements. Yet EPDM needs very little, if any, maintenance. While you’ll want to clean your roof periodically, simply to keep things like fungi or algae from growing, the synthetic rubber itself won’t need any help.

This also provides greater savings. The longer you can go without having to fix your roof again, the more of a return you’re getting on your investment. But this can also provide great savings for use on an office building. As that type of building constantly undergoes inspections for worker safety, you won’t have to worry about spending more to keep it up to code.


It’s hard to think of another option that can provide the kind of longevity you’ll get from installing EPDM Roof coatings. The ERA (EPDM Roofing Association) recently conducted a study. In it, they examined a number of EPDM roof coatings that were 30 years old. Their finding was that, even after 3 decades, the EPDM maintained a high degree of tensile strength, almost as if it were new.

Installing EPDM:

Installing EPDM Roof Coatings

Installing EPDM Roof Coatings

Keep in mind that the above advantages are contingent on quality installation. While many people may be successful in installing EPDM on their own, they take the results into their own hands. Many of the benefits listed above will not be a factor if installation is mishandled.

When it comes to putting a roof over your head, you’d be hard pressed to find a better option than EPDM rubber. For added savings, incredible durability, and little-to-no maintenance issues, EPDM roof coatings will deliver. Best of all, you won’t have to think about it again for decades to come.

Like us on Facebook