Liquid EPDM and its benefits

The EPDM roofing association which started in 2002 has always focused on educating contractors and the roofing community on the characteristics and benefits of EPDM membranes. Their studies have concluded that EPDM’s service live is over 20 years. Arguably the most important benefit of an EPDM system is the membrane’s flexibility. A growing number of contractors are specializing in EPDM installation, due to its low callbacks and insurance premiums. EPDM roofing systems also feature low maintenance, easy repair options and low annualized costs.

With Liquid EPDM there is No cutting, No gluing and No Seaming! EPDM Liquid Rubber® totally eliminates the problems encountered with single ply materials because it produces a seamless membrane which is all of the same chemistry. So what do we gain by using EPDM Liquid Rubber®? It eliminates seam failures and eliminates shrinkage of the single ply rubber. It also prevents further chalking particularly with white EPDM and it extends the life of a roof. Liquid Rubber®, available through Epdmcoatings.com is the only EPDM in Liquid form. This product is a high solids solution of sheet EPDM Rubber. It converts from liquid to solid elastomer via a unique free radical cure mechanism which works at temperatures of 55° F and higher. EPDM Liquid Rubber® can be applied directly on many types of substrates that have solid, stable, non-porous and uniform surfaces such as flat roofs. For most substrates, primers are not necessary. As an example, some types of substrates that can be coated with EPDM Liquid Rubber® without a primer are:

• EPDM Rubber Membrane on flat or sloped Roofs
• Weathered Steel Siding
• Outstanding barrier for salt-water environments
• Weathered Fiberglass
• Weathered standing seam and corrugated metal roofs
• Weathered Vinyl, PVC and Polycarbonate plastic
• Foam insulation for pipe
• Cast Concrete foundations

Liquid Rubber® may be applied at any temperature that permits it being spread onto the surface. It will waterproof immediately upon application. The solvent will evaporate at a rate governed by temperature but will not be affected by relative humidity. Exposure to freezing temperatures before cure has taken place will not damage the film. The time necessary to reach cure should not be a concern as this process will occur automatically. Exposure to sunlight will accelerate the curing process. The final film properties of the cured membrane will be the same regardless of the time required to achieve cure.

EPDM Liquid Rubber® will provide long term protection even under extreme exposure conditions. It is resistant to temps of 300 degrees F and minus 62 F. Liquid rubber is water resistant even in an uncured state. An unexpected rain shower shortly after application will not wash it off. The slow cure and non-polar nature of EPDM Liquid Rubber® gives it outstanding surface wetting properties. The product does not fill cracks and crevices but will produce an even film penetrating even the smallest surface irregularities. When EPDM Liquid Rubber® is applied over porous surfaces such as poured concrete, pinholes will appear on the surface as the material slowly displaces the air in the pores. This surface wetting feature enables the product to be applied in a SINGLE COAT and the still results in complete film integrity. EPDM Liquid Rubber® can be applied to hot surfaces encountered during the summer. The solvent in the system will flash off rapidly but the polymer will remain soft long enough to permit overlapping even after 1-2 hours. The cure rate is still controlled even at temps up to 120 degrees. The product can, therefore, be applied on the hottest day.

The controlled cure rate also results in a longer pot life, giving the applicator more than adequate length of time (4-6 hours depending on temperatures) to use the mixed quantity of material. Adhesion will increase over time. Polar surfaces such as metal, concrete and wood result in stronger adhesion than non-polar surfaces such as asphalts. Most weathered surfaces including single ply and thermoplastic membranes will have enough of a surface profile to anchor the EPDM Liquid Rubber®

By itself, the EPDM Liquid Rubber® membrane will exhibit the characteristics of its EPDM chemistry i.e. U.V. ozone stability, excellent ponding water resistance and long-term retention of flexibility. EPDM Liquid Rubber® applied over generally sound singly ply EPDM can extend its life another 20 years. The useful life of metal roofs will also benefit greatly when EPDM Liquid Rubber® is applied. It is recommended that a corrosion inhibitive primer first be applied to areas where severe rusting has occurred. EPDM Liquid Rubber® does not contain any corrosion inhibiting pigments but it is such an effective moisture barrier that it can be applied directly over light rust without a primer. For more information contact EPDM Coatings or call at 855-281-0940. They also have a blog filled with discussions from customers as well as valuable information on the product at http://liquidroof.blogspot.com/

The Best Roof Coatings for Your RV Roof Maintenance

When it comes to maintaining your vehicle’s roof, the first step is to make an inspection at least once a year. That could mean getting out your ladder. Be careful. Remember that most accidents occur at home.

An annual power washing is usually recommended. If you have been to the beach, take the time to wash the salt and sand off of your vehicle on your way home. Salt and sand are corrosive. The best coatings for your RV roof maintenance help to protect against this kind of corrosion, but cleanliness is still important.

The best coatings for your RV roof maintenance are the ones that last the longest. Most experts agree that the longest lasting sealants are the ones made of EPDM rubber.

EPDM is a material often used in new construction of the vehicles. The manufacturers apply the rubberized membranes to the metal roofs to protect them from the elements, to help prevent rusting and to provide some protection against debris.

It is often debris though that causes the damage. Rapid temperature changes hail and even sudden afternoon showers can cause damage too. The least expensive coating alternative and the one used most commonly is an acrylic water-based product. While that might seem like an inexpensive alternative, it can be costly in the long run. The temperature extremes and other threats mentioned above can partially or totally destroy an acrylic coating, leaving the metal exposed.

You might not know that the metal is exposed until you see a leak or do annual maintenance. By then, there could be rust and damage to internal insulation and other materials. You should be able to see how costly the whole thing can become.

If you choose the best coatings for your RV roof repair, you could save money in the long run. If you’re smart, you’ll choose to apply the coating when the vehicle is new as a protective measure. You’ll just have to check to make sure that you are buying a brand that is compatible with the materials used in the construction of your vehicle.

Not only does a liquid rubber coating provide benefits that include waterproofing, protection against damage from flying debris and increased lifespan of the vehicle reduced risk of leaking. The coating improves the cosmetic appearance and often helps to keep the interior of the vehicle cooler during hot summer months. There may also be some soundproofing advantages when you choose the best roof coatings for your liquid roof maintenance.

Creative Maintenance and repair of Roofs & Homes

Talking about feasible and suitable home repairing and maintenance, that is the hottest issue for every person and they want to get the most effective results and creative work for saving their property. In this busiest life, home owners and industrialists have very little time for repairing and maintaining their homes, roofs and commercial sectors. So they want some special type of products for repairing and maintaining their homes and offices, by applying them, they can easily repair and maintain their homes for many years. In order to provide the results for this requirement, there are number of challenges which a contractor have to face during the tear off the roof or home and installing a new roof.  They have several ways of completing task of construction, in shifts and at once or regular basis, but for a creative maintenance of a roof and provide long time strength to the home, there is the never ending responsibility for a builder. More over when a home owner wants to get the work with less cost and down timing, this responsibility exceeds its limits and become a new challenge for home constructors. So the home constructors have a long list of responsibilities that is endless.

With recurring costs and time consuming repairs, facility maintenance personnel are focused on providing a safe and efficient environment to the homeowners and to provide satisfactory results. There are many products in use for construction purpose that gives the extra ordinary results that can easily satisfy the home owner and also easy in application for the constructor. As Liquid roof coatings are the best sealant for repairing, it gives full recovery for any roof leaking problem that may occur because of summer sun or heavy rain. Liquid roof is also most famous product among the constructors because it provide a time down criteria for its application with full coverage of roof leaks. So constructors have numerous proven solutions to solve maintenance issues for all types of homes and roofs and commercial sectors on the basis of all these products. They also provide the surety to reduce costs and downtime while improving product life cycles and energy efficiency.

Continue reading