Why Using EPDM Liquid Rubber to Repair Roof Leaks is Wise

One of the most time-consuming and stressful jobs that a person can take on in their lifetime is as a homeowner. Maintaining the vital systems that a home has is no easy job and will usually require the help of trained professionals. There are some jobs that a homeowner can attempt to do on their own. Fixing smaller roofing leaks can be a great DIY job if the homeowner uses the right methods of repair. When a leak is detected in a home’s roof, the homeowner will have to act quickly to reduce the damage that is done. Using EPDM liquid rubber to fix a small roofing leak is a wise choice. Liquid rubber can provide a variety of benefits when used for the purpose of repairing a small roof leak.

Avoid Using a Roofing Contractor

EPDM liquid rubber is the best way for a homeowner to get their roof fixed without having to use a contractor. Before taking on the task of applying this coating, the homeowner will need to do a good bit of research. Among the most important things that the homeowner will need to do when trying to use this product effectively is to make sure the spot that they are patching is free of debris. Having any dirt or debris on the surface being patched can lead to the rubber not adhering properly.

Light Weight Patching Solution

Having too much weight on a roof can lead to a variety of different problems. Using EPDM liquid rubber to patch holes in a roof will be very effective and light weight. There are a number of fiberglass patch kits on the market that can stop a roof leak, but will add a bit of weight to the spot they cover. This can make the spot of the roof that the patch is on more susceptible to ponding problems. Rather than making the roofing issues that a home has worse, the homeowner will need to make a choice to use the liquid rubber coatings available to them.

Conforms As It Cures

Choosing to use EPDM liquid rubber to patch a home’s roof will help to create an undetectable finished product. As the liquid rubber begins to cure and dry, it will begin to conform to the surface that it is placed on. This means that there will be a smooth surface when it is done drying. By using liquid rubber, the homeowner will be able to create the air tight seal they need to fix their leaks once and for all. If unsure about how to use the liquid rubber, then a homeowner will need to get a bit of guidance from a roofing professional in their area.

Taking the time to get this type of guidance will allow the homeowner to get the comprehensive roofing solutions that they are after. A professional will be able to guide the homeowner through the mixing and application of the EPDM liquid rubber with ease.

How an EPDM Rubber Roofing System Can Benefit a Business Owner

Owning a business comes with a variety of different challenges. For most small business owners, finding a commercial building is essential. Making sure that the commercial building they are in stays in good shape should be one of the top concerns that a business owner has. The roofing is one of the most important systems on a building. Selecting the right type of roofing is important due to the long term implications that it can have on the overall condition of the building. An EPDM rubber roof is among the most used materials for a commercial roof and for good reason. Selecting this type of roofing material can be very beneficial on a variety of different levels.

Great for Any Climate

Among the biggest concerns that most business owners will have is saving money on their operating costs. The energy bills for a commercial building can be quite high, but it does not have to be this way. Installing EPDM rubber roof can help to keep the internal temperature regulated. A white EPDM roof is a great option to use in hotter areas due to the low rate of heat absorption. The black EPDM roof is ideal for colder climates due to the higher rate of absorption. Speaking with the roofing professionals hired for the job can help a business owner get the information they need to make the right choice.

Long Lasting Roofing Solutions

The roof on a commercial building takes a lot of abuse from Mother Nature. Due to this high level of abuse, a business owner will need to have their roofing inspected and maintained on a regular basis. An EPDM roof can last about 30 years if the business owner has it cared for properly. A professional in the roofing business will be able to inspect and address any of the repair issues that are found. The money that gets paid to these professionals for this type of work will be worth it considering the damage they can prevent.

Resistant to Thermal Shock and Hail Damage

The EPDM rubber roof is very durable and can resist things like thermal shock and hail damage. The heat that a roof is exposed to on a daily basis can cause thermal shock. This type of condition leads to the expansion and contraction of the roofing materials, which will only cause damage over time. The EPDM rubber roof is impervious to the thermal shock, which means that the business owner will not have to worry about this type of damage when choosing this roofing solution. The durability and resiliency that this type of roofing has makes it well worth the initial investment that the business owner will have to make.

Selecting an EPDM rubber roof can provide a business owner with the low maintenance roofing solutions they are looking for. Choosing the right professionals to install the roof is important and will help to ensure that the job is done the right way.

The Essentials of Properly Applying An EPDM Rubber Roof Coating

A lot of work goes into maintaining a building. Most new commercial building owners are unaware about just how many different systems they will have to keep up with when attempting to keep their investment in good shape. Taking the time to get to know the vital systems in a commercial building can help to save an owner a lot of time and trouble. The roofing system on a commercial building can come in many forms. If the roof is flat, then chances are that the roofing will be made of EPDM rubber. The best way to offer this rubberized material the protection that it needs is by applying a specialized EPDM rubber roof coating. There are a number of different types of coatings out there and finding the right one can be made a lot easier by speaking with a professional in the EPDM industry. Applying the roof coating is not easy and will require a number of considerations to be made.

Cleaning the Roof is Essential

The first thing that has to happen when trying to get the EPDM rubber roof coating applied the right way is the cleaning of the roof surface. Over time, the rubber membrane on a flat roof will acquire a lot of dirt and grime. The roofing professionals that are hired to perform this type of work will use a specialized cleaning solution to mop up the dirt and grime off of the surface. By working on one section of the roof at a time, the professionals will be able to get the surface clean and puddle free in no time at all.

Repairing All Damage Present on the Roof

Before the EPDM rubber roof coating can be applied to a roof, the professionals will have to do a thorough inspection to determine if there is any damage. If there is damage found, the professionals will have to get it fixed. Neglecting to fix holes or tears in the rubber membrane will usually lead to issues down the line when the coating begins to wear off. The time and money that the business owner invests into getting these repairs is worth it. The professionals will also be able to address any ponding issues that may be present on the issues by applying a liberal amount of sealant to fill in the dip that this type of condition causes.

Rolling the Sealant On

Once all of the prep work has been done, the professionals will be able to start rolling on the EPDM rubber roof coating. In order for this sealant to do its job, the professionals will have to work a section at a time getting a thick coating applied. The last thing that a commercial building owner needs to do is to try and apply this coating on their own. Attempting to do a DIY EPDM rubber roof coating job will usually end in mistakes that can cause long-term problems for a commercial building owner.

Getting the right professionals hired for this type of work is an essential part of getting the job done right. Be sure to call around to a few different roofing professionals in an area to get an idea of what each of them can offer.

How to Decide What Type of EPDM Rubber Roof Coating is The Best Fit

A commercial building is a very big investment and will require a bit commitment from the owner. When owning this type of building, a person will be responsible for all of the maintenance and repair issues that arise. One of the best ways to maintain an EPDM roof is by choosing a quality coating for it. The coatings on the market will actually act as the top layer of the roofing, which can help to prevent damage to the actual rubber membrane. Most commercial building owners fail to realize that there are a variety of different EPDM rubber roof coating materials out there. Choosing the right one will require the commercial building owner to get familiar with the options that they have and decide which is the best fit for their needs.

An Acrylic Based Coating

Among the most common types of EPDM Rubber roof coating used by professionals is an acrylic based variety. These types of covering are water-based, which is great for the environment and very cost effective. In most cases, this type of coating will be used in hotter areas due to the cool down effect that it has. This reflective material will help to reduce the amount of heat the roof absorbs, as well as limit the damage that can be caused by UV rays.

Polyurethane Roof Coatings

The next type of EPDM rubber roof coating available to a commercial building owner is made of a polyurethane base. This type of coating is generally used by commercial building owners that are in areas prone to damaging winds. The polyurethane is used to create a more durable surface that is able to withstand higher winds. In most cases, this type of coating is used near the flashings of the roof. By placing this coating on the flashing, a commercial building owner will be able to protect against damages that may cause leaks.

Silicone Roof Coating

Adding a silicone EPDM rubber roof coating can help a commercial building owner avoid damages caused by extreme temperature. This type of coating provides a very slick surface and can be applied in multiple layers. The more layers of silicone based coating a commercial building owner has on their roof, the more durable it will ultimately make it. By talking things over with a roofing professional, the building owner will be able to figure out how many coats of this silicone based covering they need to adequately protect their roofing. The professionals will be able to weigh a variety of different factors regarding the roofing on a building in order to make the right recommendations. Failing to apply enough of this silicone based coating will leave an EPDM roof exposed to the elements.

The time and energy that goes into choosing the right EPDM rubber roof coating will pay off. The right coating will allow a commercial building owner to avoid serious repair issues that are caused by lack of protection on the rubber membrane of their roofing.

How to Find a Roof Repair Specialist

While it would be great if we could repair all the issues that pop up with our RV over time, the fact of the matter is that sometimes it’s necessary to call in the professionals. It may be that you don’t have the necessary knowledge, the tools/equipment/material, or the time available to complete the job. Whatever your reason for calling in a RV Roof Repair specialist, there are some tips you can follow in order to ensure you find the best person for the job. Let’s take a closer look.

Word of Mouth

One of the best ways to find a specialist is to ask around. Ask your friends who own RVs who they can recommend and even who they may have had a bad experience with. You may want to actually contact a couple of different specialists and ask for references, just be sure to follow up and give those references a call.

Know What to Ask

Of course contacting references and asking family and friends is only helpful if you know what to ask. Be prepared and have a list of questions handy. Some of the questions you may want to ask are:

  • Was the work completed in a timely manner? Was it completed in the timeframe the specialist gave?
  • Was the final price the same as the price that was quoted?
  • Does that specialist offer any sort of customer satisfaction guarantee?
  • What kind of supplies does the specialist use? Top quality, or is it cheaper materials?
  • Is the specialist easy to contact so you can set up the appointment?
  • Does the specialist follow-up after the job is complete?

Having your questions handy will ensure you get the answers you need. You can almost treat it like an interview, and you are the one interviewing your friends/family about the specialist.

Get a Quote in Writing

Once you narrow down your list to a couple, a good idea is to have them come out and offer a quote on the job. Be sure to get that quote in writing so it can’t be forgotten or changed later on. The specialist should offer a free quote, if they don’t you may want to find someone who does.

The quote should contain not only the price of the job but also the timeframe needed, the labor that will be done, and even a list of materials if you want all the details. Ask how long the specialist will honor the quote for, as some offer that price for a limited timeframe only.

Do Some Research of Your Own

It’s also wise to do a little research of your own, this means taking a look at the problem so you can get an idea of just how extensive the damage may be. You can look into the ways in which this problem is usually repaired so you’ll know if the quote the specialist is giving you seems’ reasonable. Look into such things as how to fix an RV roof, materials used on RV roofs, etc.