Your roof’s job is a simple one. It’s supposed to keep the outside world where it belongs: outside. Just like your walls, your roof is a necessary component to providing shelter. But at one point or another, many homeowners will find out their roof isn’t up to the task. If they’re lucky, this will simply mean a leak they need to seal. However, depending on where that leak goes, damages can be expensive. That’s why every homeowner should give their roof the help it deserves by using roof coatings. Read on for more information on roof coatings.
What Are Roof Coatings?
Roof coatings are fairly self-explanatory. They are chemicals used to coat your roof, thereby sealing it off against the elements, debris and fallout from your chimney, heating and cooling units. The idea is to give your roof some added help in supplying your home or commercial building with shelter.
Generally, roof coatings are made from a rubber polymer that comes in liquid form and can be applied without any heating. Application is no different than painting and paint rollers are actually one of the preferred methods of doing it (sprayers can be used too).
The Benefits of Coating Your Roof
Coating your roof comes with many benefits. First of all, it can save you money over the long term. That’s because a roof that is sealed off will take on far less damage from the outside world. This means far less, if any, leaks or other issues that will need repair.
By repelling sunlight, coatings can also save you on your energy bill as it will cost less to keep your home or building cool. If you have a commercial building, your HVAC will be put under less stress and your employees will be more comfortable throughout the structure.
Due to their simple application, there are almost no byproducts associated with coating your roof. The same cannot be said for other repairs, restorations and improvements your home’s roof can need. Estimates hold roofing projects responsible for 40% of all the construction garbage that goes into landfills.
Application
To coat your roof all you need is the EPDM Coatings, a roller and an extension and a paint brush. Before you get started, though, you’ll want to thoroughly clean your roof of any excess oils or debris. Once it’s clean, you can begin applying the coating. You should use about a gallon for every 100 sq. ft. as this will result in a thick layer. If it’s easier, apply the coat in two layers, giving the first one adequate time to dry.
As this is an important job that might necessitate minor repairs before beginning, it might be a good idea to contact local professionals. Be sure to find one who has had experience with this matter before and can supply you with references.
Coating your roof is a great and affordable way to make sure you avoid problems before they ever start. While the coating application is simple enough, it’s a big enough project that you might find it worthwhile to hire a professional.
I am located in Panama – Central America. Interested in your coating applications to residential light roofing (coatings to metal, fiber-cement, clay).
Sure please provide your e-mail or phone and I will contact you directly
Thank you
Greg Kaz
It burns up from excessive heat or is “squeezed out” (exceeds its load bearing capacity)
due to excessive pressure. With gas prices climbing, people are seeking other ways to save on fuel such as buying small or mid-size SUV.
Synthetic blend is not as good as full synthetic, and it is marketed to people that can not decide which type of oil to choose.
Thank you for sharing such important details on this matter.
Thank you you can also look at our videos at this link https://www.epdmcoatings.com/videos.php
you’re welcome!