Proper planning will help you avoid quite a few problems while applying roof coatings and achieve desired results with greater success rate. This is why it is important for you to do your homework appropriately before you go for roof coatings. Determine what your need is. What exactly is going to be the purpose of the repair work? This will help you cut your work out and avoid the loss of time and money. You don’t have to get the whole roof replaced if there are some leaks and penetrations. Sometimes you can easily ignore the seams which have fully not surfaced or are not easily visible. After all your hard work and having applied roof coatings extensively, if you still do not get the desired results, you’re bound to meet frustration only.
Decide beforehand whether you can do it yourself or not. Don’t forget you can’t be an alternative for the professionals. If you don’t know enough about roof coatings or haven’t applied it before, it’s wise not to take risks with your repair work. Better give an opportunity to the professionals to deliver. And if you have made up your mind to use your own knowledge and experience to repair your roof, make sure you keep in view three major steps needed for a perfect application of roofing technique. Clean, prep and coat, it’s as simple as that.
Obviously, you have to necessarily do thorough research to find out the best brand which offers quality and reasonable price for the material that you’re going to need for roof coatings. If the surface has oils, dirt or old roof material, remove them beforehand and completely, otherwise you may end up having imperfect roof coatings which you don’t want at all.
Once you have started the hard work, ensure you are going to pay attention to every nook and corner so that every hidden seam and temporarily covered crack is properly taken care of. Your execution of the roofing technique can be perfect only when you have read, understood the instructions and guidelines properly.
There is nothing wrong with applying roofing techniques on your own but you need to be extra cautious to make it work. Understanding the nature of the material which is to be applied and your own capabilities whether you can do it or not is of crucial significance for a successful roof repair experience.
i want to use this product on a shingle roof around the fireplace flashing. if the flashing has rust in some spots is there another type of primer that needs to be applied prior to epdm? does it come in a tube or can?do you apply it with a paint brush?