What You Need to Know About Liquid EPDM

When it comes to getting the utmost in protection for the roof of your commercial building, you may be surprised to learn that your best option actually comes in liquid form. Obviously, you want a solid roof, but for the best results, you should add a barrier of liquid EPDM to it. However, before you go using this powerful resource, it’s important to understand what it entails.

EPDM Is a Synthetic Rubber

In case you’re unfamiliar with the material, altogether, liquid EPDM is a synthetic rubber that was designed to form an impenetrable membrane. While it comes out as a liquid, being exposed to air is enough to eventually turn the chemical into hard rubber. Usually, this only takes an hour or so.

You Want to Hire a Specialist for Application

For the most part, liquid EPDM isn’t too difficult to apply. It is often sprayed over the roof in question, though other times it might be rolled out like paint.

There are some versions you can find in department stores that are meant for anyone. Generally, though, they’re designed for people who want to quickly seal a hole in their roof or cover a leak under one of their home’s shingles.

If you want to get liquid EPDM spread out over your commercial property’s roof, though, you should definitely hire a professional. That kind of job is too big and too important to try handling on your own without any prior experience. In fact, you should really go with a specialist, because your average roofer might end up making costly mistakes.

EPDM Is Low Maintenance

Most roofs need a good degree of TLC throughout the years. Many homeowners know they will most likely have to pay to have some work done after five or six years. Commercial properties can sometimes demand even more attention, depending on the climate it’s in.

One major advantage of using EPDM to coat your roof is that it will need almost no maintenance over the years. At most, you may want to repaint it, but that shouldn’t become necessary for at least a decade after it’s installed. All you need is acrylic paints too, which make the process incredibly affordable.

EPDM Is Very Green

If you’re someone is interested in taking care of the planet, you’ll love how green EPDM is. The fact that it will last for roughly 20 years before needing to be replaced automatically equals a savings in materials.

The airtight seal provided by EPDM also means you’ll be spending a lot less on utilities throughout the year. The sun’s heat can’t get through and force you to jack up your A/C. At the same time, the hot air you pay for can’t escape through the roof either.

Now that you understand more about liquid EPDM, you should be more confident in your decision to have it installed on your property. As we mentioned above, just be sure you go with a professional to ensure it’s installed without issue.

How Liquid Rubber Has Changed the Roofing Industry

When you think of rubber, you may not think about the roof for your commercial building. Instead, it’s more likely that you imagine the tires on your car or maybe the rubber bands you have in your desk. Whatever the case, the point is that if you want the best protection for your building, it begins at the top and it involves using liquid rubber.

What Is Liquid Rubber?

The type of rubber we’re talking about here is a synthetic version called EPDM. Ethylene propylene diene terpolymer can be used for a number of different things, but the reason people have begun applying it to roofs is the durability it provides. It also helps that the application process ensures every last square inch of the roof gets the coverage it needs.

Liquid Rubber Expands with Your Roof

While it may not seem obvious, your roof actually moves. As the seasons change, it will actually contract or expand slightly depending on the temperature. This is an important fact to grasp because it helps explain why EPDM Rubber has become so important as a way of adding extra protection to roofs.

Any material that isn’t applied as a liquid coating can’t compare because it also can’t move with the roof. When it expands, the defensive measure will be left behind. When the roof contracts, the material can actually crack or otherwise become damaged. This is supposed to be your defensive measure!

EPDM will move with the roof, providing coverage at any size and never cracking just because the top of your building contracts slightly.

EPDM Is Temperature-Resistant

On top of that, EPDM will hold up to extreme temperatures better than anything else. Put simply, it will maintain its structural integrity should the temp ever drop to 40 degrees Fahrenheit or even if it gets up to 300.

Is it likely that will ever happen? No, of course not, but those numbers definitely speak to how much liquid rubber is able to fend off. Whether your building is located where it snows year round or in a place that the sun beats down upon nonstop, your roof won’t become compromised.

Affordable Applications

Protecting your roof from the elements really isn’t a luxury option you can afford to consider. It’s something you must absolutely do or even the smallest leak could end up costing you dearly.

Unfortunately, traditional methods for doing this can hit your budget hard. One of the main reasons liquid rubber has taken the industry by storm is because it won’t make you choose between the wellbeing of your building and half your budget.

Not only is the material affordable, but having professionals apply it for you is far cheaper than the other options out there. You don’t need heavy machinery or long hours and there isn’t the loud noise that usually keeps away customers.

Don’t take chances on the future of your roof. Instead, use EPDM to ensure it is able to keep the outside world at bay and protect your money at the same time.

The Essentials of Properly Applying An EPDM Rubber Roof Coating

A lot of work goes into maintaining a building. Most new commercial building owners are unaware about just how many different systems they will have to keep up with when attempting to keep their investment in good shape. Taking the time to get to know the vital systems in a commercial building can help to save an owner a lot of time and trouble. The roofing system on a commercial building can come in many forms. If the roof is flat, then chances are that the roofing will be made of EPDM rubber. The best way to offer this rubberized material the protection that it needs is by applying a specialized EPDM rubber roof coating. There are a number of different types of coatings out there and finding the right one can be made a lot easier by speaking with a professional in the EPDM industry. Applying the roof coating is not easy and will require a number of considerations to be made.

Cleaning the Roof is Essential

The first thing that has to happen when trying to get the EPDM rubber roof coating applied the right way is the cleaning of the roof surface. Over time, the rubber membrane on a flat roof will acquire a lot of dirt and grime. The roofing professionals that are hired to perform this type of work will use a specialized cleaning solution to mop up the dirt and grime off of the surface. By working on one section of the roof at a time, the professionals will be able to get the surface clean and puddle free in no time at all.

Repairing All Damage Present on the Roof

Before the EPDM rubber roof coating can be applied to a roof, the professionals will have to do a thorough inspection to determine if there is any damage. If there is damage found, the professionals will have to get it fixed. Neglecting to fix holes or tears in the rubber membrane will usually lead to issues down the line when the coating begins to wear off. The time and money that the business owner invests into getting these repairs is worth it. The professionals will also be able to address any ponding issues that may be present on the issues by applying a liberal amount of sealant to fill in the dip that this type of condition causes.

Rolling the Sealant On

Once all of the prep work has been done, the professionals will be able to start rolling on the EPDM rubber roof coating. In order for this sealant to do its job, the professionals will have to work a section at a time getting a thick coating applied. The last thing that a commercial building owner needs to do is to try and apply this coating on their own. Attempting to do a DIY EPDM rubber roof coating job will usually end in mistakes that can cause long-term problems for a commercial building owner.

Getting the right professionals hired for this type of work is an essential part of getting the job done right. Be sure to call around to a few different roofing professionals in an area to get an idea of what each of them can offer.

How to Decide What Type of EPDM Rubber Roof Coating is The Best Fit

A commercial building is a very big investment and will require a bit commitment from the owner. When owning this type of building, a person will be responsible for all of the maintenance and repair issues that arise. One of the best ways to maintain an EPDM roof is by choosing a quality coating for it. The coatings on the market will actually act as the top layer of the roofing, which can help to prevent damage to the actual rubber membrane. Most commercial building owners fail to realize that there are a variety of different EPDM rubber roof coating materials out there. Choosing the right one will require the commercial building owner to get familiar with the options that they have and decide which is the best fit for their needs.

An Acrylic Based Coating

Among the most common types of EPDM Rubber roof coating used by professionals is an acrylic based variety. These types of covering are water-based, which is great for the environment and very cost effective. In most cases, this type of coating will be used in hotter areas due to the cool down effect that it has. This reflective material will help to reduce the amount of heat the roof absorbs, as well as limit the damage that can be caused by UV rays.

Polyurethane Roof Coatings

The next type of EPDM rubber roof coating available to a commercial building owner is made of a polyurethane base. This type of coating is generally used by commercial building owners that are in areas prone to damaging winds. The polyurethane is used to create a more durable surface that is able to withstand higher winds. In most cases, this type of coating is used near the flashings of the roof. By placing this coating on the flashing, a commercial building owner will be able to protect against damages that may cause leaks.

Silicone Roof Coating

Adding a silicone EPDM rubber roof coating can help a commercial building owner avoid damages caused by extreme temperature. This type of coating provides a very slick surface and can be applied in multiple layers. The more layers of silicone based coating a commercial building owner has on their roof, the more durable it will ultimately make it. By talking things over with a roofing professional, the building owner will be able to figure out how many coats of this silicone based covering they need to adequately protect their roofing. The professionals will be able to weigh a variety of different factors regarding the roofing on a building in order to make the right recommendations. Failing to apply enough of this silicone based coating will leave an EPDM roof exposed to the elements.

The time and energy that goes into choosing the right EPDM rubber roof coating will pay off. The right coating will allow a commercial building owner to avoid serious repair issues that are caused by lack of protection on the rubber membrane of their roofing.

The Basics of EPDM Single Ply Membrane

EPDM single ply membrane is regarded as extremely effective in liquid EPDM roofing solutions. The reasons for such efficiency are more than one. One of the basic reasons for this efficiency is the moisture resistance capability of EPDM single ply membrane. Inappropriate drain positioning, or structural deflection leads to low areas on your roof which allows moisture to pond over time. EPDM is considered to be extremely effective against such a condition.

Liquid EPDM sheets can be as large as up to 50 feet in width. These sheets are mostly used in the form of mechanically fastened and ballasted applications. If you are looking for greater flexibility in positioning EPDM single ply membrane, narrower widths are also available. If you’re wondering whether you can have these narrow streets without factory seams or not, the good news is yes you can have them.

Generally, EPDM membrane is available in various thicknesses, such as from .045 inches to .090 inches. EPDM single ply membrane is also available as reinforced and non-reinforced sheets. Liquid EPDM is regarded as one of the most environmental and sustainable materials in construction industry these days. Due to its excellent performance, it has less drastic impact on environment. One of the major characteristics of liquid EPDM is its capability to demonstrate resistance to moisture absorption. Such a capability has made EPDM single ply membrane a strong option for underground waterproofing applications. These are the conditions where the material is buried in saturated oil and only EPDM has turned out to be productive.

If you’re wondering how ponding areas can be dangerous for traditional roofing techniques, be aware that lagging water causes decay of organic face, granule loss, algae growth, surface cracking and premature curing. You’ll be surprised to know that EPDM membrane cannot be affected by any of these problems occurring in ponding areas. The good thing about EPDM roofing solutions is even if mistakenly you happen to create deflection and as a result ponding on your roof, EPDM membrane offers more safety margins in such an event. With traditional roofing techniques, you cannot take the risk of avoiding positive drainage. And if you happen to have any deflection, ponding areas will come into existence in the case of traditional roofing techniques which in the end create immense problems for the roof to avoid cracks, seams and penetrations.