5 Tips to Help You Identify and Repair Roof Leaks in Rubber Roof Coatings

Your roof is a vital component of your home. It protects your interior from the elements, from harsh sunlight, and from temperature extremes. It also helps hold the entire structure together. If you have an EPDM rubber roof, you enjoy significant benefits over other types of roofing systems, such as asphalt shingles. However, you are still subject to leaks, and those can be challenging to locate. In this post, we want to address several tips to help you identify and then repair roof leaks in rubber roof coatings.

Start from the Inside

Finding a leak can be hard, unless it’s so bad that water is visibly dripping from the ceiling of your home, which usually isn’t the case. Often, it is easiest to spot signs of a roof leak from the inside of your home, rather than from the outside. Look at ceilings throughout your home, as well as the walls. You’re looking for darker discolorations, often red or brown. These are signs that water has made it to the sheetrock, penetrated the material, and then dried. If you see any of these markings, you certainly have a leak. However, it might not be directly above the area where the discoloration appears, as water can enter through the roof, run down the underlayment, and then drip down far from where it originally entered the home.

Get Up in the Attic

To find leaks in rubber roof coatings, you will eventually need to get up in your attic or crawl space. This gets you one step closer to the source of the leak and will allow you to further investigate the situation. Once in the attic, go to where you saw the water stains on the ceiling or wall. Use a flashlight to locate water stains on wood or to find wet insulation (which can be challenging to spot on its own).

Follow the Trail

Once you have found where the water is coming from, it’s time to follow the trail. In some instances, you may find that there’s a puncture in the roof and underlayment directly above the space where you noticed the water damage in your home’s interior, but this is not usually the case. You’ll often have to follow the trail from that point to where the water actually entered the home. Remember that water always runs downhill, and it always follows the path of least resistance. With that in mind, try to trace its path back to the point of origin.

Inspect the Top for Damage

In some cases, this may lead you to obvious damage. If you spot a hole in your roof, that’s more than likely going to be the source of your leak. However, you may not find any large gap in the roof. Instead, you’ll find a point between two pieces of roofing underlayment where water entered. To find out what’s really going on, you’ll need to get on top of the roof.

Getting up on the roof of your home is always a dangerous proposition, so be careful. Make sure to have a helper handy in case you fall and need help. Using a ladder, climb up on your roof and go to the area where you believe the water entered the structure. Check for punctures through the rubber, or areas where caulking might be missing. Damaged flashing can also allow water into your home.

Use Liquid Rubber for Repairs

Once the source of the leak is located, rubber roof coatings can be repaired with Liquid Rubber. A single layer of Liquid Rubber gives you a waterproof seal immediately, preventing further water incursion into your home.

Worth It or Not: Rubber Roof Coatings

The roof of a building, commercial or residential, can be troublesome in terms of needing expensive repairs. There are things you can do though that will help to bring down the number of times you’ll have to be look at repairs.

When you invest in a building, it’s likely the largest investment you’ll ever make. Buildings do require some work for the upkeep and longevity of your investment. Something you spent so much money to get should be cared for as much as possible so it continues to serve its purpose for a long time.

The Trouble Usually Starts at the Top

If you’ve owned any kind of building before, you know that rooftops can take a beating. You might also know that when there’s trouble that brings on the need for repair, it usually starts at the top, where you’ll find—the roof.

Issues that you’ll find with a structure’s roof are gaps in the seams, water leaking in from somewhere, drafts coming in, or dents, dings, and scratches caused by flying debris or hail. You could also see water ponding, meaning your roof doesn’t have good drainage, or drying that leads to cracks.

There is a solution that will help stave off all of these things that cause so much damage to a roof and, in turn, the interior of the building.

Rubber Roof Coatings

You can fix or prevent most or all of what we just mentioned by applying one of the rubber roof coatings that’s on the market today. A coating like this will help keep your roof in the best shape possible and it will extend the life of it for what could be decades.

Liquid EPDM Rubber

This is an easy-to-apply solution to most of the problems that building owners are faced with when it comes to their roofs. These coatings come in liquid form that simply has to be painted on and allowed to dry so it cures and creates an airtight, watertight, and UV resistant seal over the entire surface of the top of the building.

Is It Worth It?

Our answer to the question of whether it’s worth it or not to put rubber roof coatings on rooftops is a resounding yes it is. The number one factor that causes damage to a home or commercial space is water that comes in through the roof.

The roof of a building is exposed to rain, snow, ice, wind, dirt, debris, UV rays, hail, and so much more. All of those elements can cause damage to the roof and open up the interior of the structure to even more damage. When the roof of gets compromised, it allows the outside elements to come inside and creates more problems in the interior.

You could potentially prevent thousands of dollars in repairs and replacements by applying one of the rubber roof coatings to a building’s rooftop.

How Much Do Rubber Roof Coatings Cost?

Obviously, we’re talking about saving money in the long-run, so you’re likely wondering how much it will cost you up front. Some of the price will be determined by how big the surface of your roof is. You’ll need to measure the length and width of the roof to get the coverage area. You’ll then purchase the amount of product needed to cover that surface.

One thing you can look for is an all-in-one product that doesn’t need a primer put on first and gives you total coverage in one coat. You can save time, money, and energy by using a product that gives you total coverage and protection in just a single coat.