Product Primer- EPDM Roof Coatings

Liquid Roof
Liquid Rubber
Proflex Primer

Please input dimensions:

Width

Length

1. PRODUCT NAME PrimeLock Acrylic Primer 2. PRODUCT DESCRIPTION PrimeLock Acrylic Primer is a durable rust-prevention primer designed to inhibit rust and improve adhesion of all EnergyGuard Elastomeric Roof Coatings. It contains rust inhibitors and mildewcides. BASIC USES Built-Up Roofing (BUR), Modified Bitumen, Polyurethane Foam, Single-Ply Roofing and PVC ADVANTAGES Versatile. May be used over a wide range of substrates. Excellent weathering characteristics. Excellent adhesion and corrosion resistance. Dark color absorbs the sun's heat to accelerate the curing process or to increase roof temperature prior to the application of polyurethane foam. Easy-to-use, nontoxic and VOC-compliant water-based coating.
3. TECHNICAL DATA See the table below. 4. INSTALLATION All surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Any existing coating must be checked for good adhesion. Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility. PrimeLock Acrylic Primer is ready to use. Thinning is not recommended. Containers should not be left open for extended periods of time. Follow our roof restoration procedures and always perform a coating adhesion test before doing the entire roof. Spray: Airless sprayer, 1 gpm, 3,000 psi, .017 tip. Brush: Good quality synthetic bristle brush. Roller: Short nap roller. Cleanup: Water.	5. AVAILABILITY AND COST PrimeLock Acrylic Primer is available directly from EPDM Coatings and online. Pricing information can be obtained from an EPDM Coatings representative. 6. WARRANTY On preapproved, qualified applications, using Lexis-approved applicators, a 10-year warranty is available. Contact Lexis Coatings for complete warranty information. 7. MAINTENANCE Periodic maintenance of Lexis Roof Restoration System ensures extended service life and maintains reflectivity. 8. TECHNICAL SERVICES Contact EPDM Coatings for Technical Support. Additional information, product literature, brochures and specifications are available. 9. FILING SERVICES Additional product information is available from EPDM Coatings.

1. PRODUCT NAME
PrimeLock Acrylic Primer

2. PRODUCT DESCRIPTION
PrimeLock Acrylic Primer is a durable rust-prevention primer designed to inhibit rust and improve adhesion of all EnergyGuard Elastomeric Roof Coatings. It contains rust inhibitors and mildewcides.

BASIC USES
Built-Up Roofing (BUR), Modified Bitumen, Polyurethane Foam, Single-Ply Roofing and PVC

ADVANTAGES

Versatile. May be used over a wide range of substrates.
Excellent weathering characteristics.
Excellent adhesion and corrosion resistance.
Dark color absorbs the sun's heat to accelerate the curing process or to increase roof temperature prior to the application of polyurethane foam.
Easy-to-use, nontoxic and VOC-compliant water-based coating.

3. TECHNICAL DATA
See the table below.

4. INSTALLATION

All surfaces to be coated must be clean, dry and free of any oil, grease or dirt.
Any existing coating must be checked for good adhesion.
Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.
PrimeLock Acrylic Primer is ready to use. Thinning is not recommended.
Containers should not be left open for extended periods of time.
Follow our roof restoration procedures and always perform a coating adhesion test before doing the entire roof.
Spray: Airless sprayer, 1 gpm, 3,000 psi, .017 tip.
Brush: Good quality synthetic bristle brush.
Roller: Short nap roller.
Cleanup: Water.

5. AVAILABILITY AND COST
PrimeLock Acrylic Primer is available directly from EPDM Coatings and online. Pricing information can be obtained from an EPDM Coatings representative.

6. WARRANTY
On preapproved, qualified applications, using Lexis-approved applicators, a 10-year warranty is available. Contact Lexis Coatings for complete warranty information.

7. MAINTENANCE
Periodic maintenance of Lexis Roof Restoration System ensures extended service life and maintains reflectivity.

8. TECHNICAL SERVICES
Contact EPDM Coatings for Technical Support. Additional information, product literature, brochures and specifications are available.

9. FILING SERVICES
Additional product information is available from EPDM Coatings.

PrimeLock Acrylic Primer Technical Data

Property	Value	Test Method
Color:	Gray
Viscosity:	700±100 cps	Brookfield
Solids:	40%
Density:	8.5 lbs per gallon
Flash Point:	None
Coverage:	0.50 gallons/100 square feet to 0.75 gallons/100 squarefeet depending on surface porosity.
Application Temperature:	55°F - 100°F, less than 85% relative humidity.
Dry Time:	3 - 6 hours, 24 hours to recoat.
Shelf Life:	12 months @ 40°-90°F
Cleanup:	Water

Caution: EnergyGuard™ Elastomeric Roof Coating is a water-based product that will freeze and become unusable at temperatures below 32 F. Suspend all application if conditions prevent a complete cure before the onset of sunset, rain, fog, dew or freezing temperatures. Lexis Coatings must be completely dry before it is exposed to water or foot traffic. Keep Lexis Coatings containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, DO NOT induce vomiting. Call physician immediately.

Elastomeric Coating

PrimeLock Acrylic Primer is a water-based product that will freeze and become unusable at temperatures below 32 F. Suspend all application if conditions prevent a complete cure before the onset of sunset, rain, fog, dew or freezing temperatures. The product must be completely dry before it is exposed to water or foot traffic. Keep containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations. Keep away from children. If ingested, DO NOT induce vomiting. Call physician immediately.

Product information contained herein is presented in good faith and is believed to be reliable. It does not constitute part of our terms and conditions of sale. It is also not a guarantee, either expressed or implied, that the data are correct or that products described are merchantable or fit for a particular purpose, as methods of use are beyond our control. Customer should determine the suitability of our materials and installation recommendations before usage. Manufacturer's sole responsibility shall be to replace that portion of any product that proves to be defective.

Facebook Twitter YouTube