Welcome to EPDM Coatings Q&A, where you can ask questions and receive answers.

Related questions

0 votes
1 answer 59 views
0 votes
1 answer 572 views

Is it possible to apply Liquid Rubber with a sprayer, maybe a sprayer that is used for car undercoating?

0 votes
asked Aug 18, 2015 in Liquid Butyl Rubber by anonymous

1 Answer

0 votes
you an apply with a sprayer please see the specifications below

Thank you

Spray Application

Use an air atomized or airless spray, roller, squeegee o

brush. A combination of methods may be most effective.

For example, on a flat roof, pour a serpentine bead of

material from the pail. Distribute it with squeegee. Finish it

with a short nap roller to press air out of cracks and even

out the wet film.

A.) Equipment:

Use a 3 gallon per minute airless spray

pump capable of developing a minimum 3,000 psi outlet

pressure. It should have a 3/8” ID hose or larger with

a max length of 100 ft. Use a tip size of .015 or .017 for

smaller pumps and a .019 tip for larger capacity pumps.

Use a 100 mesh strainer at the outlet of the pump or in the

handle of the gun. Use a swivel fitting at the gun in place

of a “whip” in order to reduce the pressure drop through a

smaller ID hose.
answered Aug 20, 2015 by admin
...