EPDM Silicone 99
EPDM Silicone 99 is a high yield, low VOC, one-part silicone elastomeric coating specifically designed for use in roofing applications as a protective coating over a variety of roofing substrates
Product Description
EPDM Silicone 99 is a high yield, low VOC, one-part silicone elastomeric coating specifically designed for use in roofing applications as a protective coating over a variety of roofing substrates. Once cured this liquid applied silicone coating provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, EPDM Silicone 99 provides greater UV protection than similar silicone coatings and offers increased resistance to moisture penetration. EPDM Silicone 99 provides excellent long term protection through exceptional weatherability properties.
Recommended Uses
EPDM Silicone 99 was specifically developed as a protective coating for a wide variety of low slope roofing substrates. Coverage per 5-gallon pail is 400 sq/ft. Custom colors are available for orders over 50 gallons (Customer Color Chart can be viewed here) With excellent adhesion and durability, EPDM Silicone 99 is proven to provide excellent UV protection and long term durability. It can be used directly over the following substrates (ONE COAT IS ALL THAT IS EVER NEEDED !) Minimum orders are (5) 5-gallon pails. Call for contractor pricing.
Acceptable Substrates
EPDM
PVC & Hypalon
Aged TPO
Concrete
BUR Surfaces
Granulated Modified Bitumen
Metal
New Spray Polyurethane Foams
It is also recommended for protecting vertical walls, masonry, concrete
Latest Projects
| TYPICAL PHYSICAL PROPERTIES | |
|---|---|
| Coverage: | 400 Sq ft Per (5) Gallon pail |
| TOTAL SOLIDS: | 96% ± 2 by volume ASTM D2697 |
| WEIGHT PER GALLON: | 10.7 lbs per gallon |
| FLASH POINT: | 290° F |
| CLEAN UP SOLVENT: | ALDOTHINNER |
| SHELF LIFE: | 6 months @ 35°- 75° F |
| VISCOSITY: | 4800-9000 cPs |
| ELONGATION: | 249% ± 50 |
| HARDNESS: | 50 ± 5 Shore A |
| TENSILE STRENGTH: | 325 psi ± 50 |
| PERMEABILITY: | 4.2 perms |
| SERVICE TEMPERATURE: | -50º TO 200º F |
| THINNER: | 87% |
| THERMAL EMITTANCE: | 89% |
| CURE TIMES: | 2-8 Hours |
| TACK FREE: | 1 Hour |
| SKINOVER: | 30 Minutes |
| VOC: | 100 grams per liter |
CALL US: 610-298-1989 ext 9
“Thank you for a great product that has taken our old As Was roof with leaks to a water-tight barrier for our business!”
Jeff Stuecklen