EPDM Coatings N.E Sales Office 494

CALL TO PLACE YOUR ORDER: 610-298-1989 ext 9

CUSTOMER TESTIMONIALS

We just finished about 5000 sq ft of the roof. I got about 150-170 sq feet per 5-gallon bucket. This was because of the about of imbedded rock in the roof material. All in all, the cleaning was 90% of the work as we blew it all off first then power washed the roof which took forever. The application of the product was very fast. Thanks for your help and I look forward to continuing on with the entire roof.

Sean M
Denver CO

image
image
image
image

We have been dealing with a deteriorating roof for a long time and finally had the Butyl Liquid Rubber recommended by another of our properties. We had applied the flash coating and once it cured, we had more rains. So far, even with just the flash coating, we have not had reports of roof leaks. We applied the main coat and it should cure before the next round of rain. I wish we had known about this product sooner! We will be ordering much more as you can see we have quite a bit of roof on the outlet buildings.

Wilson Rader
Operations Director
HAGERSTOWN PREMIUM OUTLETS

image
image
image
image

Here are some pics from my completed project. I have a slightly sloped modified bitumen roof on the upper part of my house. There were no leaks in the old roof but i wanted to keep it that way with your product going over the top of the existing roofing. It is 400 sq ft. I ordered 8 gal of your black liquid butyl rubber and 1 gal of roof cleaner. I cleaned the roof. Let it dry. And applied the rubber with a paint roller and long handle. It went on very well and was an excellent project. Cleaning took 90 mins. Butyl application took 2 hours.

See the pics attached. First pic is cleaning, then before starting, then during application and finally 2 after completion. The white spots in the final pics are just sun reflections. Could not be more pleased. After I did my research, the solvent based Liquid BUTYL rubber looked to be the best. Also, the fact that there was no primer and you only needed one coat was a huge plus. Great customer service also.

image
image
image
image
image

This is an ongoing project consisting of 40,000 sq ft of metal roof. As you can see the metal is heavily rusted and with the Liquid Butyl Rubber there are no primers or rust treatment needed. As you can see it literally can be applied directly over this rusted roof. This allows our customer to save considerable time and money with our one coat process. The reason is our unique solvent that allows the Liquid BUTYL Rubber to literally chemically cross-link to the substrate it is being applied over. As the product dries it becomes one in the same with your existing roof. A unique chemistry we challenge you to fine in another coating. Our product has also been ASTM certified and with over a 25-year history of success has been the choice of thousands of satisfied customers around the world. For more information or wholesale pricing call 610-298-1989 ext. 9

image
image
image
image
image

EPDM Coatings Team

Responding to your before and after for AMEX: Thank you for a great product that has taken our old As Was roof with leaks to a water-tight barrier for our business!

Best,
Rob

Robert S. Hepler
Vice President
HT and C Enterprises

image
image
image
image
image
image
image
image

We finished our prep work around the entire roof. Amazing how the product self-leveled and it certainly has some teeth to it as it cures. We will be placing the big order for the entire roof in a few weeks.

Thank you, guys for all the help. By the way NOTHING compared to the Liquid Butyl Rubber vs the other products our engineer tested. We had tested 4 different products before we pulled the trigger on yours.

image
image
image
image
image
image
image
image
image

Greg/Lenny, and Gang,

I am very impressed with your product. Our roof had severe leaks before. Obviously as a car dealer with a showroom we were very concerned that nothing had fixed them to date. We purchased your product and applied it earlier this year. We were very concerned last week as the remaining storm from hurricane/Tropical storm Ian just came through dropping over 2 inches of rain during that period. Happy to say the building is dry. Not one leak!

Initially our seams were the issue but decided to coat the entire roof while we were doing the project. SeamTight was applied to the seams, and we embedded the poly fabric into the seams let dry and then came back and coating the entire roof with the Liquid Butyl Rubber. Our AC areas were really bad, so we coated around those first with the SeamTight. Was very impressed with the way that the product self-leveled. We had tried the traditional products from the local stores. Elastomerics and acrylics but they did not hold up after a couple years plus most required primers. We considered silicone but when we found that it attracts dirt and looses it UV after a few years we continued our search. We tested your product on our 2nd floor area last year before we decided to coat the roof. It is true on the site what it says once this is down you are not peeling this up. Expecting to do our other roof next year that one is about 22,000 sq ft.

Thanks Again
Dennis

image
image
image
image
image
image