Pre Treat
EPDM Silicone roofs from asphalt bleed-through with Pre-Treat. It inhibits oils and plasticizers from discoloring the roof topcoat.
Benefits of EPDM Silicone
- One-coat application
- Excellent adhesion
- Can be applied by spray, roller or brush
- Part of breathable system that allows trapped moisture to escape
Types of Applications
- Asphaltic surfaces
- Metal surfaces
- Wood surfaces
- Concrete surfaces
- Most single-ply roofs
- Metal buildings and roofs
- Modified bitumen and built-up roofs (Requires Pre-Treat)
- Polyurethane foam and concrete surfaces or roofs
- Single-ply roofs
- Industrial roofs
- PVC Roofs
- TPO-Must be aged five years.
- TPO must be cleaned with our Roof Protect found on our site
- TPO must have remaining service life. TPO scrim must not be visible throughout the field of the roof. If very light scrim is showing we suggest ordering our TPO Base coat. Surface must be dry. Any of these could cause the material to blister/wrinkle
- Concrete
- Metal
- Fiberglass
- Sprayed Urethane Foam Roofs- Be sure roof is dry. Moisture will cause coatings to blister (Call for tech support)
- Any roof where a 3rd party coating such as an elastomeric or acrylic was previously applied.
- Any other application must be approved in writing . NOTE: Not to be used for 3rd party silver-asphalt based coatings unless entirely removed
