Liquid Rubber Coatings Combat Roof Problems

When you have a roof that’s seen better days, or even a roof that’s still in good shape, you want to make sure that you can extend its life. Using Liquid Rubber coatings is a good way to do that. They can help to combat many of the most common problems that roofs have to face.

The Sunlight

When the sun shines down on a roof year after year, it can cause some problems. The UV rays can damage the surface of most roofs, including those that use tar and asphalt. Over time, the roofing membrane becomes brittle and starts to break away. This leaves gaps in the roof that could be a way in for the next big problem we’ll be talking about with roofs.

Water

When there are cracks in a roof, even tiny cracks, if means that water has the potential to find a way into your building. That’s the last thing you need. Once the water gets inside of the building, it can start to damage other parts of the structure, the wiring, and your belongings or stock that is in the building.

If you live in an area where it gets cold and freezes in the winter, the water that has made its way down into the roof could expand, causing some severe damage that would require a roof replacement.

Fluctuations in the Temperature

The roof goes through expansion and contraction as the temperature changes. In the winter, the roof contracts, and in the summer, it expands. When the roofing membrane can’t keep up with these changes, it means it will start to crack and break. The same thing could happen as a building starts to settle. You need to have a roofing membrane that is able to move along with the building.

Other Damage

Quite a few other things could damage the roof as well. Wind, falling debris, chemicals and pollutants spilled onto the roof. There are countless ways that the roof could face damage. What are you supposed to do about it? If you use Liquid Rubber coating for your roof, you will find that it can mitigate many of these problems.

How Do Liquid Rubber Coatings Help?

These coatings are amazing. They are UV resistant, and they are flexible. This means that they can expand and contract along with the building based on any temperature fluctuations. In addition, they are waterproof from the minute you apply them, so you will not have to worry about water getting into the building. Since the product is white, it will reflect the sunlight. One of the added bonuses is that this can make the building easier to keep cool in the summer.

If you want to give your roof some additional protection, instead of looking at an expensive replacement, consider using Liquid Rubber coatings instead. They are easy to apply, even on your own, and they can provide you roof with true protection from most of the things that can cause damage to it.

Tips for Applying EPDM Liquid Rubber Manually

One of the best ways to protect a roof from all manner of problems including UV light and leaks is with EPDM Liquid Rubber. One of the nice things about this product is that you will be able to install it on your own if you have the time and the DIY spirit. The following are some tips to help make it a bit easier for you.

Have the Right Tools

First, you need to make sure you have the right tools and equipment on hand. You should have an electric drill, a paddle mixer so you can mix up the liquid and the catalyst, and a roller, such as the type that you would use for painting. Just make sure that it has a rubber squeegee. You should also have a paint brush, and some rags and xylene for cleaning up if you make a mess. You will have up to four hours to remove any splashes or drips that occur using the xylene and the rags. Even when you are careful, chances are good that you will make at least a little bit of a mess.

One Coat Is All You Need

You only need to apply a single coat of the EPDM Liquid Rubber to get the desired results. You need to make sure that you apply the coat evenly, and according to the instructions on the container. Keep in mind that different types of roofing surfaces will allow you to spread the liquid at different rates. For smooth surfaces, you will need about one gallon for every 40 square feet. If the surface is rougher, you will need to change your estimate, as you will get about 30 square feet for every gallon. Use this as a basic calculation of how much of the EPDM Liquid Rubber you will need.

Don’t Paint Yourself into a Corner

This is a common saying because it happens, sometimes literally. Always make sure that you have a way to get off the roof as you are painting. You want to paint yourself into a corner of the roof and have to wait until it dries to get down!

Consider Working with a Specialist

Even though it is quite possible to apply your EPDM Liquid Rubber to the roof on your own, as you can see from the simple instructions, you might want to consider working with a professional. If you don’t have the time to do a proper job, or if you don’t have the tools, or knowledge, then a professional can help to ease your mind. You don’t want to get halfway through the application only to realize that you have air bubbles and that the EPDM Liquid Rubber isn’t adhering properly. If you feel that you need some professional help for the roof, there’s no shame in that. Just make sure that you hire a roofer who has experience with the Liquid Rubber.

Regardless of whether you apply the EPDM Liquid Rubber on your own or have some help, it’s important to take action soon. You want to make sure that your roof is protected.