Why You Should Opt for Liquid Rubber?

You should opt for liquid rubber as it is a very useful, efficient and unique matter which has been used as a roofing solution with tremendous success. It was originally created by Kuraray Co. Ltd. in 1972 as a thick, viscous liquid which is derived from butadiene, isoprene and/or styrene. It is transparent and odorless. One of the primary uses is that it is used at a “Reactive Plasticizer”. It comes in liquid form and when used, it cures to form a hard and sturdy surface holding almost any required shape. It is successfully used for a variety of purposes, ranging from toys which are molded to useful roofing solutions.

Liquid Rubber Application

Liquid Rubber Application

Liquid rubber has been specially used all over the North America for over 20 years, in places and areas where extreme temperature spikes and fluctuations is a norm. It is very easy to use and an extremely productive seamless waterproof membrane. Due to its special characteristics, it can easily meet most of the health, safety and environmental requirements, and therefore provides great industrial and commercial benefits.

Applying liquid rubber is a simple, hassle-free and safe process. You can apply it on the required surface area using a brush and roller which is more appropriate for small scale residential projects. The large scale projects, for which you can use it, include factory or warehouse roofing which uses a spray system. It can be sprayed on the required surface area and this method can be used to cover up to a thousand square meters in a single day. This method is generally referred to as “Instant Set”, and it does exactly what the name suggests – the liquid rubber takes the required shape naturally and instantly, giving you instant waterproofing. Since the rubber that is sprayed is cold, it also eliminates any potential fire hazards, and it forms itself quickly as singular and seamless membrane. Since this method does not require the usage of any fleeces or primers, this method of roofing has proved to be up to five times faster than many other comparable roofing solutions.

Its unique composition gives its users an astonishing elasticity of up to 1100% along with a startling memory of 95%. It is almost unparalleled when used as a roofing solution on roofs which are expected to face excessive movements.

EPDM Roof Coatings

Application of EPDM Roofing Materials

This roofing solution provides similar advantages to that of EPDM roofing solution – it offers protection against ozone and heat, as well as provides good resistance against polar substances and steam. Additionally, liquid rubber roof is also resistant to water, salt and alkalis. It also gives a smooth, crease-free surface, and is easy to apply. The only issue with this type of roofing is that you cannot directly apply it to asphalt roofs or asphalt shingles. You need to first apply a coat of acrylic solution on which the liquid rubber can then set itself.

Ping Back here: Why You Should Opt for Liquid Rubber? – Epdmcoatings.com

Why EPDM For Your Roof?

EPDM (ethylene propylene diene monomer) is one of the ways through which you can ensure that you have safe and proper roofing. This roofing solution has been in use for over 50 years, and therefore boasts proven performance record. EPDM has proven itself to be a long term roofing solution with studies indicating that it can provide protection for more than 40 years.

The two main elements of EPDM, ethylene and propylene are derived from gas and oil. They are used for a variety of purposes, ranging from radiators and tubing to vibrators and solar panels. Although it is generally used in vehicles, it has proven to be a highly effective and practical roofing solution. It is a reliable resilient synthetic rubber roofing membrane and mainly used on low-sloped buildings and flat roofs all across the world. This is primarily due to its extremely high resistance towards weather, ozone and heat. It also has excellent electrical insulation properties and offers protection from steam and polar objects. They tend to come in both black and white colors and can be of various lengths ranging from seven to fifty feet, while its thickness is either 45mm or 60mm.

Generally, installing EPDM roofing is a safe and simple process as it does not require the use of any heavy machinery. It comes as a single, lightweight ply membrane. It is cut and tailored according to the requirements. Since it is made from high quality polymer, it costs less as opposed to other roofing solutions. Due to the fact that it is a lightweight material, the labor cost is also significantly reduced.

EPDM roof once installed requires little or no maintenance. It is very easy to repair these roofs and even costs less to do the annual maintenance. It is an extremely sturdy material, and yet it boasts an unusually superior flexibility in comparison with other similar materials. Due to the fact that the material is rubbery, it is highly durable and greatly resistant against abrasion and tear.

With many similar rubbery roofing solutions, you might have to seam together multiple pieces of “sheets” which can expose the risks of water accumulation, damp and all types of related issues. This is a problem which is eliminated by the fact that it comes in a block which is generally sufficient to cover almost any roof. Most suppliers provide roughly twenty years of guarantee with a life expectancy over 50 years – it is clear that EPDM is more than up to the task of protecting almost all roofs for a significant length of time. Furthermore, you must also know that EPDM helps with lower insurance premiums. Not only that, it is also a friend to the environment, as it has limited environmental impacts in comparison with some of its rivals.

Ping back here : EPDM has proven performance record

Easy Ways to Avoid Costly Forms of RV Roof Repair

No one wants to spend the time and energy on getting their RV’s roof repaired. But you’d never know it, judging by how some people treat their vehicles. If you don’t take the necessary steps along the way, RV roof repair will become inevitable. Continue reading to learn some simple things you can do to make sure that your RV doesn’t end up needing constant repairs to its roof.

Safety First
Before you ever do anything involving your RV’s roof, be sure you check the owner’s manual. You’ll want to be well informed about how much weight it can carry. Even if you’re well below the maximum amount that it mentions in the manual, it’s best not to spend any more time on top of your RV than you absolutely need to. The fact that you can see damage has been done means that there could be more elsewhere. Take the wrong step, and all of a sudden you could need professional help for your RV roof repair.

Inspect It Regularly
If you aren’t constantly looking, it can be easy to forget how much abuse your RV’s roof takes. From tree sap to rain to debris and much more, your RV is constantly being exposed to issues that could easily result in its roof needing repairs.

So the first step in avoiding RV roof repair costs is inspecting the roof every 3 to 4 months. If it stays parked under trees for prolonged periods of time, you’ll want to do this more often. Otherwise, you risk issues like algae and mold building up. Be sure that the seams get a close inspection every 6 months, as well.

This means checking the inside, too. Just because you don’t notice any issues from the outside, that doesn’t mean your RV isn’t in trouble. Water stains on the ceiling or towards the top of the walls are reliable signs that something has gone wrong.

Clean Regularly
Inspecting your RV’s roof is important, but so is keeping it nice and clean on a regular basis. Oftentimes, you can’t see the beginning of a problem forming, but cleaning your RV’s roof is a big step in stopping that issue in its tracks. Always be sure that you’re using products that have been specifically made for RVs.

Handle the Issue on Your Own
Sometimes, no matter what you do, problems arise. Fortunately, if it’s a leak, many will fall under the kinds of RV roof repairs that an amateur can handle on their own. You can save a lot of money this way, too. So, if you notice a leak, be sure to address it as soon as possible. Just like with cleaning supplies, though, you’ll want to make sure that you only use products that were made for an RV. For example, if you have a leak, you’ll want to use a sealant. Plenty are made for actual shingle-and-tar roofs, but that will only make matters worse in this scenario.

Fortunately, if your RV springs a leak, there’s plenty you can do to handle the matter on your own. Most people would like to avoid any RV roof repair with Liquid Roof as much as possible. As such, follow the above advice, and your roof will be less likely to need your help.

How Roof Coatings Can Stop Leaks Before They Ever Happen

Your roof’s job is a simple one. It’s supposed to keep the outside world where it belongs: outside. Just like your walls, your roof is a necessary component to providing shelter. But at one point or another, many homeowners will find out their roof isn’t up to the task. If they’re lucky, this will simply mean a leak they need to seal. However, depending on where that leak goes, damages can be expensive. That’s why every homeowner should give their roof the help it deserves by using roof coatings. Read on for more information on roof coatings.

What Are Roof Coatings?

Roof coatings are fairly self-explanatory. They are chemicals used to coat your roof, thereby sealing it off against the elements, debris and fallout from your chimney, heating and cooling units. The idea is to give your roof some added help in supplying your home or commercial building with shelter.
Generally, roof coatings are made from a rubber polymer that comes in liquid form and can be applied without any heating. Application is no different than painting and paint rollers are actually one of the preferred methods of doing it (sprayers can be used too).

The Benefits of Coating Your Roof

Coating your roof comes with many benefits. First of all, it can save you money over the long term. That’s because a roof that is sealed off will take on far less damage from the outside world. This means far less, if any, leaks or other issues that will need repair.

By repelling sunlight, coatings can also save you on your energy bill as it will cost less to keep your home or building cool. If you have a commercial building, your HVAC will be put under less stress and your employees will be more comfortable throughout the structure.

Due to their simple application, there are almost no byproducts associated with coating your roof. The same cannot be said for other repairs, restorations and improvements your home’s roof can need. Estimates hold roofing projects responsible for 40% of all the construction garbage that goes into landfills.

Application

To coat your roof all you need is the EPDM Coatings, a roller and an extension and a paint brush. Before you get started, though, you’ll want to thoroughly clean your roof of any excess oils or debris. Once it’s clean, you can begin applying the coating. You should use about a gallon for every 100 sq. ft. as this will result in a thick layer. If it’s easier, apply the coat in two layers, giving the first one adequate time to dry.

As this is an important job that might necessitate minor repairs before beginning, it might be a good idea to contact local professionals. Be sure to find one who has had experience with this matter before and can supply you with references.

Coating your roof is a great and affordable way to make sure you avoid problems before they ever start. While the coating application is simple enough, it’s a big enough project that you might find it worthwhile to hire a professional.

Elastomeric Coatings for New Roofs and Retrofits

Elastomeric roof coatings have properties much like those of rubber. They can expand and contract with the surface to which they are applied. Although they will not be guaranteed to last a “lifetime”, they can last 20-25 years, which is longer than other roof coating materials.

What Is a Cool Roof?

Cool roofs are those designed to help home or business owners save money when heating and cooling their buildings. In these cases, roofs are coated with white elastomeric roofing materials that reflect heat away and keep the interior of buildings cooler.

These coatings have properties that help fight roof degradation, according to The Seattle Times. Rain, snow, heat and light will not affect them as much as they do a traditional roof coating. With proper maintenance, elastomeric coatings can last for 20 to 25 years. The only maintenance required is occasional cleaning by using a power washer or hose. The coating is reapplied every 10 to 15 years to ensure longevity.

Even if the service life of a roof is only extended five years, it can reduce the costs of rooting by over 20 percent. It also will create less landfill waste from conventional roof tear offs and re-roofing. The solid wastes in the United States now include almost four percent roofing waste.

Why Use Elastomeric Roof Coatings?

These coatings protect your roof from weather elements like sun, heat, rain, snow and wind, states Acrymax.com. In addition, you can use white elastomeric coatings to reflect back the heat of the sun, so that the interior of the building is more easily cooled. Select a coating that is resistant to dirt, so that buildup of dirt will not cause your roof to become less reflective.

Elastomeric roof coatings can be used to maximize or extend the service life of your roof by reflecting back harmful UV rays. They can be used in an effective way along with roofing repairs to maintain a watertight condition.

If your roof was coated when it was installed, you will just need to recoat the roof every 10-15 years, when the existing coat deteriorates and is no longer protecting the membrane underneath.

Facilities.net explains that light colored or reflective coatings are capable of minimizing solar gain, so they will reduce the cooling load of buildings, and lower utility costs.

What Type of Coating is Best for Your Roof?

Once your building manager has defined the goals of your roof, you will want to specify coating products that will be suitable for your building. Elastomeric coatings can be formulated from various products, including:

• Neoprene
• Hypalone
• Latex/acrylic
• Silicone
• Urethane

Elastomeric roof coatings may be used with most roof membranes today. They are most commonly used on metal and polyurethane foam roof systems.

Acrylic/latex coatings are popular in the elastomeric roofing market. They are relatively low in cost to install and they comply with emission regulations that have become quite stringent.

Neoprene roof coatings are made with synthetic rubber, and they are sometimes used as a base under Hypalon coatings.

Urethane and silicone coatings are somewhat more expensive than most other elastomeric coatings, but they do offer benefits like an enhanced resistance to ponding water, UV radiation and chemical fallout.