A Down and Dirty Guide to Repairing Roof Leaks

So your roof has sprung a leak? That’s a bummer. We hope you haven’t been ignoring it. You see, sometimes people see a leak in their roof and think it’s not a big deal. It only rains so often; how much damage can that leak be doing? The answer is that leak can do a lot of damage even if it’s small. Even worse, the leak may not actually be small at all. Just because you’re only seeing a few drips here and there doesn’t mean that the water isn’t going somewhere else where you can’t see it. And that’s the real issue. Once water is allowed to get into the structure of your building, bad things can and will happen; it’s only a matter of time.

So, if you’ve discovered a leak, then don’t delay in taking action to rectify the situation. It may be a small problem now, but it will only become a bigger,more serious problem later if you fail to act.

All right, You’ve Convinced Me; What Should I Do?

This is going to depend on how handy you are. But, because a roof leak is such a potentially serious problem, it’s advisable that you seek the assistance of a professional contractor. If, for example, that leak has managed to rot out part of the wooden structure of your building, you’re going to want to know. A licensed contractor is the person with the expertise that can help you in this situation.

But, I’m a DIY Person!

Well, then, prepare to strap in, because you’re going to have to do a few things to fix that leak!

  • Locate the roof leak: This can be much easier said than done. With a flat roof, the site of the leak within the building should, generally speaking, closely correspond with the source of the leak on the outside. With an angled roof, however, this is much more difficult, as water might seep down the inside of the angled roof before it drips, pools, and then drips down again into a room.
  • Determine what you need: A roof leak can start anywhere. It might be caused by bad flashings, it might simply be a small hole somewhere, it might even be a rotted out shingle. Depending on what’s determined to be causing the leak, you’re going to need different materials.
  • Repair the roof leaks: Once you have all of the necessary materials, it’s time to make the repairs. Since you’re going to be outside, make sure that you pick a good day to make the repairs on. Also, if you’re going to be using any dangerous chemicals or flames (as you might with an asphalt-based roofing system) makes sure that you’re taking all of the necessary safety precautions.

This is, as you can tell, only meant as a general outline of what you’ll need to do. The methods employed to fix roof leaks vary widely depending on the roofing system. So, like we said, if you’re unsure; consult a contractor!

Don’t Sweat a Leaky RV Roof

If you’re the owner of a mobile home or RV, congratulations! You’re a member of a class of people that proudly make wherever they roam their home. As your RV is your home, you’ll need to take great care in keeping up with its maintenance. You wouldn’t, after all, want negligence be the cause of some unfortunate damage derailing your cross-country adventures!

Among the most nefarious problems you might encounter in your RV is a leaky roof. Of course, it might seem as if it’s not big deal. It’s just a few drops every now and again when it rains; how bad can that be? The answer is that it can be incredibly bad! While a leak will almost always start small, they only grow over time. As they grow, they begin to pose more and more serious danger to the longevity of your RV or mobile home. A small leak today may grow into a serious structural problem caused by rot later! For this reason, it’s absolutely essential that you take action immediately when you discover your RV rubber roof is leaking.

How Can I Conduct RV Roof Repair

This is why we said don’t sweat it! RV roof repair can be an incredibly simple process, provided you take action immediately once you’ve noticed a leak. Of course, your best option will be to get in touch with a licensed RV rubber roof contractor who can assist you with making repairs. But, if you’re the do-it-yourself type, then here are the steps you’ll need to take in order to conduct an RV rubber roof repair:

  • Step 1: First you’re going to need to get your hands on the tools that you’ll need. Among those tools, you’ll need liquid roof, which you’ll use to cover the site of the leak. You’ll also need an EPDM roller, which you’ll use to apply the aforementioned liquid roof. Finally, you may need some masking tape and other cleaning products.
  • Step 2: Those cleaning products could be important, because the second step is actually cleaning your RV’s roof. In order for the liquid roof to bond adequately to your existing RV roofing system, the roof will need to be clear of dirt, debris and grime.
  • Step 3: Once the RV rubber roof is clean, you’ll then need to apply the liquid roof. Using the EPDM roller spread the rubber roof as evenly as possible over the site of the leak. It’s important that it be spread evenly, as an uneven spread could lead to problems down the line.
  • Step 4: Finally, you’re going to need to let this liquid roof dry. In order for the liquid roof to dry appropriately, you’ll have to leave it alone for a period of 24-hours. But, after that time window has elapsed, you’re done!

As you can see, making repairs to your RV’s rubber roof can be incredibly simple. Of course, you might not be the handy type, in which case it may be advisable to leave such repairs to professionals. But, you’re likely to find that such repairs for your RV’s rubber roof should be relatively inexpensive.

EPDM Roofing: The Roofing System that You’ve Been Looking For

If you’ve been looking for a roofing solution for your business, then you’ve probably been considering a lot of different options. As you’ve probably noticed, though, many of those options are going to have an adverse effect on your ability to conduct your business. With most roofing solutions, hazardous chemicals and open flames will be in play, which might make it necessary for your to shut down your business for a time. When you couple this with the expense of replacing your roof, the cost of finding your new roofing solution can be staggering.

Don’t despair, though! If you want to get your roof redone with a product that won’t adversely affect your ability to run your business, then EPDM roofing is the solution that you’ve been looking for!

EPDM Roofing: What’s That?

Good question! EPDM, which stands for Ethylene Propylene DieneTerpolymer, was invented in the 1970s, and very rapidly became a popular roofing solution. Rather than requiring a hot application like many tar- and asphalt-based roofing solutions, an EPDM membrane roof goes on cold. Additionally, it’s incredibly easy to install, as it comes in sheets that can be as large 50 feet wide. Because it’s so easy to install, it’s likely that having the roof of your business redone with an EPDM roofing solution will have a negligible impact on your day-to-day operations.

Okay, So What Are The Benefits of an EPDM Roofing Solution?

Well, if the ease of installation and the lack of dangerous chemicals and flames isn’t enough of a benefit, here are some more:

  • Long service: With proper maintenance, an EPDM roofing solution can be expected to last for 20-30 years.
  • UV-light resistance: It’s no secret that the sun’s rays can be damaging, but EPDM roofing is equal to the task.
  • Weather resistance: With the nasty weather becoming more and more frequent, you need a roofing solution that can stand up to the elements. EPDM roofing is just that solution!
  • Resistance to heat: Because of this and its UV-light resistance, you’ll find that EPDM roofing helps to keep your business cool, which will have a beneficial effect on those expensive air conditioning bills

For the reasons listed above, you’ll find that many of the EPDM roofing solutions that were installed when the product was first invented in the 1970s are still in full operation today. Because of the low maintenance costs and the high durability, you’ll find that an EPDM roofing solution is among the most cost-effect roofing solutions that your business can consider.

How Can I Get an EPDM Roofing System?

That’s easy! You’ll just need to talk to some of your local roofing companies to investigate whether or not they install EPDM roofing. In all likelihood they do, because EPDM is among the easiest roofing systems to install and maintain. So, if you’re looking for a long-term solution for your business’ roof, then look no further than EPDM!

How To Make RV Roof Repairs

Your RV is your prized possession, and you want to make sure that it gets all the love an attention that it deserves. Without a doubt, the place on your RV that takes the most abuse as you take it around the country is its roof. Unlike any other part of your vehicle, it is constantly exposed to the elements, always facing upward in the direction of the sun and its harmful ultraviolet rays. For this reason, at some point or another, you’re going to discover that your RV rubber roof needs repairs. But what should you when this happens?

Seek Out An RV Leaks Repair Contractor

If you’re not a handyman or a handywoman, then it might be advisable to seek out the assistance of a licensed and reputable contractor. This is not because making repair’s to your RV roofing system is especially difficult, but there is a bit of a learning curve that might make it hard for novices. If you have to go with this method of RV rubber roof repair, though, you’re sure to find that having the repairs done is quite affordable. Like we said, the repairs are generally uncomplicated, and the materials involved are not overly expensive.

I Want To Do It Myself!

Well, that’s the spirit. It’s probably the very same spirit that propelled you into mobile home ownership in the first place. If you want to take care of your RV roof repair all by yourself, then you’re going to need a few things first. At a local hardware store you’ll want to get your hands on the following items:

  • EPDM Roller: You’ll use this to make the repairs to your roof.
  • Liquid Roof: This is the material that you’ll use to plug in any holes.
  • Masking Tape: If you need to avoid getting the liquid roof in certain areas, this will be useful.
  • Cleaning Products: In order to make a successful repair to your RV rubber roof, you’re going to need to make it spotless first.

After you’ve secured these items, the rest should be fairly straightforward. Like we already mentioned, the first step that you’re going to want to take is cleaning your RV rubber roof. It’s important that you don’t skip this step, as an unclean roof will seriously undermine the efficacy of the RV rubber roof repairs that you’re making. So, instead, take the time to make sure your RV’s roof is a spotless as possible.

Next, you’ll apply the liquid roof using the EPDM roller. You’ll find that this is quite similar to many other roll-on materials that you might have worked with. While you’re rolling, make sure that you’re spreading out the liquid roof as evenly as possible, as this will ensure you don’t have problems later on down the line.

After you’ve finished applying the liquid roof, you should be all set. It will take approximately 24-hours for the liquid roof to set, but after that you should be good to go!

Ethylene Propylene DieneTerpolymer: Say What?

That’s sure a fancy-sounding collection of words, isn’t it? Maybe we can skip the technical jargon and just call it what it is: EPDM. But, that doesn’t clear things up does it? Well, EPDM is a kind of roofing system that is renowned for its incredible durability and cost-effectiveness. It was invented way back in the 1970s, and has continued to be the premiere roofing choice for business with low-sloping roofs, like the ones that you’ll find in a strip mall or industrial complex.

Why Are EPDM Roofing Solutions So Popular?

Like we mentioned, EPDM roofing is incredibly durable, much more so than other roofing solutions that you might be considering. It’s made out of high quality polymers that form a membrane, which can be laid out and bonded in sheets across your low-sloping roof. The sheets of EPDM roofing come in a wide variety of sizes that range up to 50 feet wide. This makes EPDM roofing incredible easy to install for a qualified roofing contractor.

Why Is EPDM Roofing So Durable?

The polymers that make up an EPDM roofing system have a lot of characteristics that make EPDM roofing solutions resistance to a great many things. EPDM roofs are:

  • Heat and fire resistance: This solves a big safety concern that you’ll find with other roofing solutions, which may be tar or asphalt based. Also, EPDM’s heat resistance goes a long way toward helping you reduce your business’s energy costs.
  • UV light resistance: This factor of EPDM also contributes to its ability to help your business lower its energy costs. Moreover, resistance to UV light allows your roof to withstand the harmful rays of the sun, which can degrade other roofing solutions over time.
  • Ground-level ozone resistance: Ozone is another thing that can have adverse effects on other roofing solutions. You won’t find this problem with an EPDM roofing solution.
  • Weather resistance: You roof is going to be exposed to the elements 24 hours a day, 7 days a week. So it’s important that your roofing solution be incredibly resistant to foul weather, which is something that an EPDM roofing system can offer you.

As you can see, EPDM roofing systems offer the gamut of resistance. That’s why many of the EPDM roofing system that were installed when it was first invented are still doing their thing on the roofs of businesses today.

What if My EPDM Roofing System Needs Repairs?

In all likelihood, your EPDM roofing system should require minimal maintenance. But, if you do find yourself in a position where repairs will need to be made, you’ll find that a licensed contractor will have an easy time doing them. Your roof will first need to be washed, as this will ensure that the products used to repair your EPDM roof will bond appropriately to this roofing system’s surface. After the EPDM roof has been washed and repaired, a protective coating will be placed over the repairs. In the end, you’ll likely find that your repaired EPDM roof is just as good as the roof was when it was first installed.