Liquid Applied Roofing Systems

Information about Liquid Roof and Its Benefits

Here you can learn a bit about liquid roof and its benefits for new and existing construction. Let’s start with the basics.

What Is It?

Liquid roof is a liquefied version of a synthetic rubber typically referred to as EPDM. The letters EPDM stand for ethylene, propylene, diene monomer and M class respectfully.

Before the liquefied version came on to the market, rolls of the rubber were used for waterproofing roofs. The liquids are easier to apply. They fill up cracks and crevices. They can go where the sheets could not go.

Why Choose the Liquids?

Ease of application is one reason. The foil is more difficult to apply correctly. You could easily end up with bumps, overlaps and uneven spots that contribute to water pooling. Water can seep under the rubber sheets and cause the roofs to leak. So, while the rolls were the best choice for waterproofing at one time, there are better choices today.

The liquids have more uses. They can be used on RV roofs and other vehicles. They can be applied to a wide range of roofing materials including metal, fiberglass and wood. Through the use of an undercoating, the liquids can be applied to built-up and asphalt-based coatings. Other reasons to choose the liquids are listed in some detail below.

Liquid Roof and Its Benefits for New Construction

For new building construction, applying the liquids increases the lifespan of caulks and sealants used to waterproof around flashing, vents, HVAC units and other protrusion points. If the new roofs are made of steel or aluminum, the liquids prevent rust and effectively extend the life of the roofing material.

If you choose white, which is the base color typically provided; the coating reduces heat within the building and also helps to protect the surrounding environment from excessive heat. Black and dark colored roofing materials are partially to blame for the high temperatures seen in southern cities during the summertime. By reducing heat within the building, the coating helps reduce air conditioning costs.

Liquid Roof and Its Benefits for Existing Construction

When applied over the entire area, the coating provides the same benefits for existing roofs as it does for new ones. It can also help to reduce noise from rain falling on metal roofs.

For roof leaks and general waterproofing, the roof coatings are the least expensive and most effective choice. So, there you have the facts about liquid roof and its benefits. It’s a money-saving environmentally friendly alternative.

As the season is changing and this would be the best time to repair their roof leaks. Summer is considered to be the appropriate season for this repair projects because of the sunny days and low showers & snow. This is the time to identify the source of leaks on their roofs. Then we need to put attention in selecting the appropriate roof coatings material to be used on our roof surfaces.  So EPDM Coatings LLC (https://www.epdmcoatings.com & http://www.buyliquidroof.com ) needs to turn the  homeowners’ to this crucial project.

Many Coatings are available in market but EPDM Coatings LLC. as having the good record in roof coatings suggest their customers to go for elastomeric coatings i.e. EPDM Coatings, Liquid Roof  Coatings and Liquid Rubber because epdm has a track record of excellent performance since long. It has strong weather resistance and flexibility in terms of elongation and contract affected by severe changes in weather. It gives UV protection and lowers your bills due to the temperature control. Liquid EPDM is excellent for both new construction and roof replacement.

Liquid Rubber Fix pond leaks. Waterproofing Fish Pond, Leaks Repair, pond liner, Fountains, & Reflecting Pools with Liquid EPDM Rubber Concrete which has not been modified with special additives must be protected by impervious coatings when used for containing water. Unprotected concrete will absorb water which can then leach out soluble constituents and cause spalling when frozen. The combination of outdoor exposure plus water immersion creates a demanding environment for a coating. It must have high resistance to water penetration, be flexible enough to withstand extremes in temperature, and not be affected by ultra violet radiation from the sun. Liquid EPDM rubber coatings possess all this characteristics and are also non toxic to fish.

Preparation. Drain water and clean surface dirt while concrete is still wet. High pressure water spray and/or scouring surface with a wire brush may be necessary in fish ponds. If algae are present treat with an algaecide or 25% solution of bleach, let stand for one hour and rise well. Allow one week (rain free) for concrete to dry out.

If you are using this in Koi tanks in immersion conditions, make sure you have 2 coats of Liquid EPDM and that you have a full cure. To do so, let cure in air (without water) for about 1 week in 70 deg F or more ). Soak and rinse out the tank several times with water before making this ready for the Koi. The soaking and rinsing is to ensure you get out any residue solvents after the curing process. You will of course need to prepare the water for the Koy in whatever normal way you prepare Koi tanks/ponds.

Whether your pond is concrete, plastic or rubber lined. EPDM Liquid Rubber can fix your leaks troubles. Plastic pond liners have a tendency to crack or to tear. There are products such at tapes and caulks that will eventually wear. EPDM Liquid Rubber, on the will not. For concrete ponds the easiest solution for leaks are to cover them with a rubber liner but they are tricky to install. Liquid Rubber Coatings provides an easy one-time solution to your pond leak regardless of if they are made of rubber, concrete or plastic. And yes, it is safe for fish!

Liquid Rubber for Coating Plywood:
Liquid Rubber Coatings has been used directly over plywood to make a finished roof in situations where expediency and minimal cost were the primary considerations. Although this procedure results in a weaker roof structure, water-tightness can be achieved if the application is performed carefully. The joint between sheets should be positioned directly over a roof truss and securely fastened to prevent warping. Next, to seal the pores, coat plywood with an oil based primer. Allow an overnight cure. Seal the joint by bridging it with a 6″ wide polyester fabric strip. Apply a light coat of EPDM rubber over the joint, lay fabric into wet rubber and smooth out wrinkles. Complete job by applying a liberal coat of Liquid Rubber over entire roof surface, being especially careful to completely cover the fabric over the joint without skips or pinholes. Using an oil base primer on the wood considerably improves the appearance of a one-coat application of Liquid Rubber.

Liquid Rubber is excellent for Wood Surfaces Repair Product; Liquid Rubber can be applied to wood. We recommend first applying a primer coat using an oil base primer and then the Liquid Rubber after the primer has dried. Liquid Rubber can be colored using “universal” colorants available at any paint store. You can add up to one cup per gallon of paint thinner for easier handling when going over wood. Liquid Rubber is slippery when there is only a fine mist of water on its surface. Silicone and oil-based materials are considered unstable and should be avoided.

EPDM rubber is used in vibrators and seals; glass-run channel; radiator, garden and appliance hose; tubing; washers; belts; electrical insulation, and speaker cone surrounds. It is also used as a medium for water resistance in high-voltage polymeric cable jointing installations, roofing membrane, geomembranes, rubber mechanical goods, plastic impact modification, thermoplastic, vulcanizes, as a motor oil additive, pond liner, electrical cable-jointing, RV roofs, and chain mail applications.

Liquid roof is the solution to all the problems in other form of roofs. It don’t leaks as it is water resistant, it is not affected by weather conditions humidity, rain or extreme hot weather. If you have a liquid roof coatings on your normal roof. It is also a very effective solution. If in case, some damage occurs to the liquid roof then it’s easy to repair as it’s economical to repair as compare to others forms of roof.

EPDM rubber (ethylene propylene diene M-class rubber), a type of synthetic rubber, is an elastomer which is characterized by wide range of applications.The E refers to Ethylene, P to Propylene, D to diene and M refers to its classification in ASTM standard D-1418. The “M” class includes rubbers having a saturated chain of the polymethylene type.

EPDM exhibits satisfactory compatibility with fireproof hydraulic fluids, ketones, hot and cold water, and alkalis, and unsatisfactory compatibility with most oils, gasoline, kerosene, aromatic and aliphatic hydrocarbons, halogenated solvents, and concentrated acids.

The main properties of EPDM are its outstanding heat, ozone and weather resistance. The resistance to polar substances and steam are also good. It has excellent electrical properties. It has the ability to retain light colour.

Hurricane damage to all types of roofs is often quite extensive and an unusual thing you may face. As a result, building codes and wind design guidelines are changing. New solutions to wind uplift problems are being introduced that allow building owners and specifiers to design and build highly durable, standard-compliant and, most importantly, cost-effective roofs, regardless of building location. Roof is as the most important investment of your building, so roofing problems need to be solved within no time delays.

Roof coating is available in an extensive range of materials and colors, each suited to a different style of roofing. Some kinds of roof coatings include liquid roof, liquid rubber, elastomeric coatings, acrylic coatings, primers, Eternabond web seal. Whilst some are elastomeric roof coatings, others are acrylic resin based. The adhesiveness to your roof can change according to the material your roof is made of. For example, bituminous roof coatings will be more adhesive to wood, while metal roof coatings can be made of either bituminous or elastomeric roof deck coatings. Depending on the climate you live in and the requirements of your roof and building (residential and/or commercial) which roof coating will best suit your roof.

As far as application of liquid roof is concerned, it offers compatibility to a large number of surfaces such as metal, concrete, fiberglass, fabric, foam, rubber. It may be applied on roof decks, metal roofs, gutters, structural steel, air conditioner enclosures, cooling towers, galvanized steel, unit heater flues, smoke stacks and chimneys, fiberglass, non porous masonry surfaces, pool liners, underground room waterproofing, and channels. It is also excellent for wood, canvas, cement, or metal roof repair over large surface areas. One most important advantage of using liquid roof is that it does not require a top coat, primer or additional applications like many other roofing products.

There are some tips which must be kept in mind before applying liquid rubber on your roof. Be aware that it is a 3 to 6 hrs process, excluding the surface preparation time. Once the liquid EPDM Rubber is applied, it takes around 16 to 20 hours to dry up. Therefore proper management of time is necessary. Careful planning regarding weather conditions should be done as well, i.e. one should plan to work on days when the rain is not expected because although Liquid Roof will immediately waterproof, even when wet, avoid heavy rain until it is completely dry to the touch which means 16 – 20 hours after application. To be on the safe side, one can say that a full cure will be achieved in 4 – 10 days after application, in consistent 70 deg F.

Liquid roof ideally can be used for many types of roof repair. One of the most important Liquid Roof Repair applications is RV Roof Repair. Liquid roof sticks to the entire types of facades- canvas, plywood, suds, cement, mass rubber, customized roofing, additional roof coverings, strengthen, timber, top tiles, genuine tiles, solid, and many more. It is the most cost effective and efficient product for solving RV Roof Leaks Repair problem as it does not chalk, shrink, crack, peak and flake.

EPDM Coatings LLC is a specialized roof coatings company. It has a research and development phase to design appropriate rubber roof coatings which best suits to your roof surrounding environment and roof conditions. When used in most industrial and commercial buildings, liquid roof coating offers large energy cost savings, preservation of the roof, and significant abatement in your replacement expenses.

Liquid Applied Roofing Systems

Liquid Roof has had a long history of superior performance in hoses, molded products, tires and roofing membranes. For example, the radiator hoses in our cars and the gaskets on our freezer doors are made of liquid EPDM rubber and show the broad temperature range the product can handle. EPDM Roofing Membranes also have more than 30 years of successful history. EPDM is relatively inexpensive, simple to install, and fairly clean to work with when compared to conventional materials. There are not the strong odors and fumes either. The product is very stable and the resulting characteristics of Liquid EPDM Roof such as flexibility, weather ability and chemical resistance are determined by it. Liquid Roof therefore, can be described as a new form of an old and well-established rubber polymer. Now you can take advantage of the same benefits to weather-tight your leaks. Liquid Roof forms a 100% seamless layer.

Being liquid roof applied, these coatings are highly versatile. With traditional resurfacing materials such as felt, it can be difficult to achieve a 100% waterproof surface especially in areas where detailing is difficult. Protrusions such as pipes and surface-mounted roof lights cannot be easily detailed by these materials alone. By contrast, liquid waterproofing can be applied anywhere where one can reach – providing total, fully adhered and seamless protection.  A long-term solution to the problem of water ingress, liquid roof coatings are highly durable and long lasting, offering up to 25 years’ protection. The systems avoid the use of heat or flames and use specialist cold applied liquid resins of various types.

This is the common problem and faced by every house hold. EPDM Coatings Liquid Roof Coatings satisfactorily solve this problem. It is gives best results on RV Roof Repair as well.