Benefit from Liquid EPDM Coatings Butyl Rubber and Rubber Roofing

Posted on January 20, 2022 by Greg Kaz.

EPDM is used for a range of purposes today. One of the most popular uses of the material is roof coatings. It is quite common on commercial roofs, and it is seeing a lot of use for RV roofs, as well. Residential homes with flat or slightly sloped roofs could benefit from using Liquid EPDM coatings Butyl Rubber and rubber roofing thanks to the advantages they can offer. It is durable and long-lasting and it is easy to use.

Liquid EPDM Is Versatile

EPDM is a type of synthetic that was created decades ago. It’s found in a range of different types of products, including sheets that can be used for the roofing system. Additionally, there are Liquid EPDM coatings Butyl Rubber for rubber roofs and roofs with other substrates. It has become a popular option for those who need an affordable way to coat their roof.

Durability Makes Liquid EPDM a Popular Choice

The protection that the coating can offer, along with its ease of use help to make it a stellar option for many property owners who have the right type of roof. It can stand up to years of use even with harsh weather and temperature extremes. The coating will provide an added layer of protection against issues like falling debris, hail, snow, etc. It shouldn’t allow any water through the membrane and onto the roof, where it would cause damage.

Adding the liquid EPDM to a rubber roof will provide a seamless seal against all manner of damage. It’s even UV-resistant, so you won’t have to worry about the sun causing it to crack.

Adding white liquid EPDM to the roof of the building or RV will also help it to reflect the sunlight. This helps to keep the interior of the property cooler during the hot weather, which could help to reduce energy bills.

Maintenance Is Simple

You will appreciate just how simple the roofs are to maintain when they have this type of coating. You will only need to check the roof a couple of times a year. Look for any signs of damage. Even though it’s rare when you have liquid EPDM, there could be damage if someone were to fall onto the roof and cause a tear or hole in the coating.

Don’t worry, it’s easy to repair if that’s the case. You could clean the area, use special butyl tape, and then add some more of the liquid coating to patch it, for example. In some cases, the entire roof might need to be recoated and resealed. Since the product is affordable, though, you won’t have to spend much to get it done.

As for keeping the roof in good condition, it’s easy. Just sweep it off and remove the debris. You can then clean it with a professional cleaner that’s safe for this type of roof coating.

Easy for DIY Application

One of the other reasons Liquid EPDM coatings Butyl Rubber for rubber roofs and other substrates is popular is because it’s easy to install. You could do it all on your own if you choose. Just get the right tools and materials and make sure you follow the directions for the application.

Of course, not everyone has the DIY spirit. If that’s the case, you could always hire professionals to handle your roofing needs. They can even inspect the roof to make sure there are no other issues that should concern you. As you can see EPDM liquid coatings are a stellar solution for many types of buildings, RVs, and more. If you need to have a roof that can stand up to the weather, ponding water, and other issues, choose this option.

Tips to Maintain Your EPDM Rubber Roofing System

Posted on December 16, 2021 by Greg Kaz.

Once you have an EPDM rubber roofing system installed, you want to make sure it lasts for as long as possible and continues to protect your roof. When it is maintained correctly, it has the potential to last for between 30 and 50 years, which is impressive for any roofing system.

Fortunately, it tends to be relatively easy to keep the system in good shape. These systems and coatings are durable and are resistant to wear and tear issues. However, they might require cleaning, as well as occasional repairs. Below are some simple tips you can use to make sure your EPDM Rubber Roofing system lasts for as long as possible.

It Starts with the Installation

A great EPDM rubber roofing system begins with how it’s installed. If it is not installed correctly, it will not work to keep your roof safe. This type of coating tends to be easy to install, and you could do it on your own if you have the DIY skills and the time to do it right. Just make sure that you follow all of the instructions.

Many people opt to have professionals come to their property to install the EPDM rubber roofing system and coating. This is especially true with larger jobs. It tends to be faster and easier, and the owners will not have to deal with any messes.

Get the Roof Inspected

If you want to keep the system in good shape, you should inspect the roof a couple of times a year at least. You could head to the roof and look for damage that will need to be repaired and then handle the repairs yourself or hire someone to do it. If you aren’t sure that you know how to find any potential roofing issues, it might be better to hire a professional to inspect it for you.

Remove Debris on the Roof

Roofs are going to get debris on them. Even if it’s a high roof and there isn’t anything around that you would imagine could get on the roof, it will. Leaves, dirt, and other debris can be carried by the wind and planted onto your roof. Therefore, if you want to keep it in good shape, you need to be sure that you are sweeping the roof and removing the debris a couple of times a year.

Have a Plan for Snow Removal

Snow can do a lot of damage to your roof. The weight of the snow can put a lot of added stress on the roof, which could cause damage to it over time. Snowmelt could also mean that water stays on the roof, especially if there isn’t a good drainage system. Have a plan for snow removal during the winter. Hiring someone to remove the snow is far cheaper than needing to replace your roof in a few years.

Remove Overhanging Branches

If you have trees near the building, you will want to trim them back away from the roof. The branches could break and hit the roof, causing damage. Even though the coatings are strong and durable, if it is struck by a heavy branch, there could be damage. It’s best to prevent this from happening in the first place.

Use Quality Coatings

Always make sure that you are choosing high-quality EPDM coatings for your roof. The best quality coatings are still affordable, and they can provide your roof with the added bit of armor it needs. The coatings can stand up to the elements, debris, and the wear and tear of time.

Get Help If Needed

If you find that you have any problems with your EPDM rubber roofing system for any reason, and you can’t handle it on your own, it’s a good idea to contact a roofing professional who can come out and help.

Five Considerations in Choosing the Best EPDM Rubber Roofing Material

Posted on December 14, 2020 by Greg Kaz.

EPDM roofing comes in many varieties, including the two main categories of rubber sheeting and Butyl liquid rubber compounds. Each has its pros and cons to consider, although most people end up choosing the liquid because it’s a seamless solution and has other benefits that make it just a little better than sheeting. However, there are applications for both, and it will be up to you to take the time to consider what you need. Here are some things to keep in mind:

Are You Doing the Roofing Yourself?

If you want a DIY roofing solution, EPDM liquid rubber roof is a great choice. Liquid Butyl Rubber is the way to go, usually, and it can be applied by anyone with basic handy skills and an ability to follow instructions. Keep in mind that you’ll need to clean the roof thoroughly before you apply a new roof coating or sealant, but the good news is that this is a fairly simple process. If you aren’t doing the work yourself, it may not matter as much how DIY-friendly a product is.

What Types of Application Does it Offer?

Butyl Liquid Rubber is versatile and is designed to work in a variety of roofing situations. Fortunately, when you are shopping for a new roofing or coating solution, Butyl Liquid Rubber roofing products are sold separately from other Butyl materials. They also keep the products categorized by the type of roofing, such as RV roofing and commercial construction roofing materials. It might sound obvious, but make sure you get the right product for the job.

Do You Want Eco-Friendly Roofing?

This is less about which product to choose and more about using Butyl Liquid Rubber in general. The synthetic rubber compound is completely recyclable, and it can provide insulation to help lower energy costs. It’s even cheaper to produce this material than other roofing materials, which makes it a great choice for anyone who wants to reduce their impact with something more eco-friendly.

How Much Do You Need?

Some products are sold in small batches and might not be cost-effective for a larger job because you’d have to purchase so much. Fortunately, if you buy Butyl Liquid Rubber for the specific task that you have at hand, it will typically come in the quantities needed that suit that niche. Still, it’s important to think about this when you are choosing materials, so you can make sure that you have enough.

Can You Afford a Premium Solution?

Any Butyl Liquid Rubber roofing is better than nothing, but some products offer a premium finish or better features than standard products. If you want to take your roofing to the next level, consider investing in a premium roofing product that is made from Butyl Liquid Rubber. It might cost a bit more now, but it will save a fortune in the long run and provide a durable roof that lasts for decades. If you need to stick to something basic, that’s fine, but it’s worth the look if you’ve got some wiggle room in your budget.

The Bottom Line

There are no two roofing projects that are the same. That’s why it’s important to consider your options before you make a final decision about how to proceed with your new roof. Whether it’s for the durability or the eco-friendliness, or any other perks, Butyl Liquid Rubber has a lot to offer. Check out the available products and see what kind of benefits you can find. Rubber roofing isn’t something that gets a lot of attention, but it should because of all that it can do. Keep these things in mind and you’ll get the best roofing solution every time.

Liquid Rubber Benefits for Your Roof

Posted on January 21, 2019 by Greg Kaz.

Are you still wondering whether you should use Liquid Rubber for your roof? If you have heard that it could be a great option for your business, or even your home, but you aren’t sure, let’s look at some of the biggest benefits

Waterproof

Leaks could be a huge problem for anyone whether it happens at their home or their business. Leaking roofs could damage to property and stock in a store, and it could cause damage to the insulation and the walls. It could even cause hazards on the floor as water drips and pools. This could be costly to take care of, and it is not something that you would want to have to deal with if you didn’t have to. The good news about EPDM Liquid Rubber is that right after the installation, the waterproofing protection will start – even before it is fully cured.

EPDM Liquid Rubber

Durable

While it goes on like liquid, when it dries and cures, this product will provide you with a strong and durable barrier that protects your roof from all of the outside elements. This protection will ensure that you no longer have to worry about leaks, which will let you rest a little easier when you see dark clouds gathering overhead. When you have this coating on the roof, it can last for up to 20 years. That’s a lot of protection for what amounts to very little work and cost.

Lightweight

Another benefit of this roofing option is the weight. When you compare it to other types of materials, such as tar, the weight is very minimal. After all, you will only need to have one or two thin coats, so it will not add a lot of weight to the roof.

Cost Effective

Even though there is the initial cost of the product, you will find that the cost of Liquid Rubber tends to be quite low compared with other options. Additionally, when you think about the protection that it offers, you will quickly see that it is far cheaper to spend on this type of roofing material than it is to pay for expensive repairs to the roof or building later.

Energy Efficient

Another of the Liquid Rubber benefits that many people never consider is that it has the potential to be energy efficient. You will notice that the product comes in both black and white. When you have white material on your roof, it will help to reflect the sun’s rays, and that can help to keep the building cooler. This could lower energy costs because you will not have to run the AC as much. If you are in an area where it gets colder, you could choose the black coating, which can absorb the sun’s rays and help to keep it warmer inside. Therefore, a business in Maine might want to have black waterproof sealant, whereas a company in Arizona might want to have white.

Is there anything that the EPDM Liquid Rubber can’t do? While it offers many nice benefits, there are some instances where you will not want to use it. If you have a property that has a steeply sloped roof, it will not be a good idea. This is because it will not dry fast enough, and it will run and pool toward the lower portion of the roof. It could even drip off the roof. Therefore, it tends to be a better solution for low-sloped and flat roof.

Other than that, there is no reason that you wouldn’t want to use Liquid Rubber. Just think about all of the benefits listed above.

Why You Should Opt for Liquid Rubber?

Posted on March 18, 2014 by Greg Kaz.

You should opt for liquid rubber as it is a very useful, efficient and unique matter which has been used as a roofing solution with tremendous success. It was originally created by Kuraray Co. Ltd. in 1972 as a thick, viscous liquid which is derived from butadiene, isoprene and/or styrene. It is transparent and odorless. One of the primary uses is that it is used at a “Reactive Plasticizer”. It comes in liquid form and when used, it cures to form a hard and sturdy surface holding almost any required shape. It is successfully used for a variety of purposes, ranging from toys which are molded to useful roofing solutions.

Liquid Rubber Application

Liquid rubber has been specially used all over the North America for over 20 years, in places and areas where extreme temperature spikes and fluctuations is a norm. It is very easy to use and an extremely productive seamless waterproof membrane. Due to its special characteristics, it can easily meet most of the health, safety and environmental requirements, and therefore provides great industrial and commercial benefits.

Applying liquid rubber is a simple, hassle-free and safe process. You can apply it on the required surface area using a brush and roller which is more appropriate for small scale residential projects. The large scale projects, for which you can use it, include factory or warehouse roofing which uses a spray system. It can be sprayed on the required surface area and this method can be used to cover up to a thousand square meters in a single day. This method is generally referred to as “Instant Set”, and it does exactly what the name suggests – the liquid rubber takes the required shape naturally and instantly, giving you instant waterproofing. Since the rubber that is sprayed is cold, it also eliminates any potential fire hazards, and it forms itself quickly as singular and seamless membrane. Since this method does not require the usage of any fleeces or primers, this method of roofing has proved to be up to five times faster than many other comparable roofing solutions.

Its unique composition gives its users an astonishing elasticity of up to 1100% along with a startling memory of 95%. It is almost unparalleled when used as a roofing solution on roofs which are expected to face excessive movements.

Application of EPDM Roofing Materials

This roofing solution provides similar advantages to that of EPDM roofing solution – it offers protection against ozone and heat, as well as provides good resistance against polar substances and steam. Additionally, liquid rubber roof is also resistant to water, salt and alkalis. It also gives a smooth, crease-free surface, and is easy to apply. The only issue with this type of roofing is that you cannot directly apply it to asphalt roofs or asphalt shingles. You need to first apply a coat of acrylic solution on which the liquid rubber can then set itself.

Ping Back here: Why You Should Opt for Liquid Rubber? – Epdmcoatings.com