5 Tips to Help You Identify and Repair Roof Leaks in Rubber Roof Coatings

Your roof is a vital component of your home. It protects your interior from the elements, from harsh sunlight, and from temperature extremes. It also helps hold the entire structure together. If you have an EPDM rubber roof, you enjoy significant benefits over other types of roofing systems, such as asphalt shingles. However, you are still subject to leaks, and those can be challenging to locate. In this post, we want to address several tips to help you identify and then repair roof leaks in rubber roof coatings.

Start from the Inside

Finding a leak can be hard, unless it’s so bad that water is visibly dripping from the ceiling of your home, which usually isn’t the case. Often, it is easiest to spot signs of a roof leak from the inside of your home, rather than from the outside. Look at ceilings throughout your home, as well as the walls. You’re looking for darker discolorations, often red or brown. These are signs that water has made it to the sheetrock, penetrated the material, and then dried. If you see any of these markings, you certainly have a leak. However, it might not be directly above the area where the discoloration appears, as water can enter through the roof, run down the underlayment, and then drip down far from where it originally entered the home.

Get Up in the Attic

To find leaks in rubber roof coatings, you will eventually need to get up in your attic or crawl space. This gets you one step closer to the source of the leak and will allow you to further investigate the situation. Once in the attic, go to where you saw the water stains on the ceiling or wall. Use a flashlight to locate water stains on wood or to find wet insulation (which can be challenging to spot on its own).

Follow the Trail

Once you have found where the water is coming from, it’s time to follow the trail. In some instances, you may find that there’s a puncture in the roof and underlayment directly above the space where you noticed the water damage in your home’s interior, but this is not usually the case. You’ll often have to follow the trail from that point to where the water actually entered the home. Remember that water always runs downhill, and it always follows the path of least resistance. With that in mind, try to trace its path back to the point of origin.

Inspect the Top for Damage

In some cases, this may lead you to obvious damage. If you spot a hole in your roof, that’s more than likely going to be the source of your leak. However, you may not find any large gap in the roof. Instead, you’ll find a point between two pieces of roofing underlayment where water entered. To find out what’s really going on, you’ll need to get on top of the roof.

Getting up on the roof of your home is always a dangerous proposition, so be careful. Make sure to have a helper handy in case you fall and need help. Using a ladder, climb up on your roof and go to the area where you believe the water entered the structure. Check for punctures through the rubber, or areas where caulking might be missing. Damaged flashing can also allow water into your home.

Use Liquid Rubber for Repairs

Once the source of the leak is located, rubber roof coatings can be repaired with Liquid Rubber. A single layer of Liquid Rubber gives you a waterproof seal immediately, preventing further water incursion into your home.

Easy Ways to Avoid Costly Forms of RV Roof Repair

No one wants to spend the time and energy on getting their RV’s roof repaired. But you’d never know it, judging by how some people treat their vehicles. If you don’t take the necessary steps along the way, RV roof repair will become inevitable. Continue reading to learn some simple things you can do to make sure that your RV doesn’t end up needing constant repairs to its roof.

Safety First
Before you ever do anything involving your RV’s roof, be sure you check the owner’s manual. You’ll want to be well informed about how much weight it can carry. Even if you’re well below the maximum amount that it mentions in the manual, it’s best not to spend any more time on top of your RV than you absolutely need to. The fact that you can see damage has been done means that there could be more elsewhere. Take the wrong step, and all of a sudden you could need professional help for your RV roof repair.

Inspect It Regularly
If you aren’t constantly looking, it can be easy to forget how much abuse your RV’s roof takes. From tree sap to rain to debris and much more, your RV is constantly being exposed to issues that could easily result in its roof needing repairs.

So the first step in avoiding RV roof repair costs is inspecting the roof every 3 to 4 months. If it stays parked under trees for prolonged periods of time, you’ll want to do this more often. Otherwise, you risk issues like algae and mold building up. Be sure that the seams get a close inspection every 6 months, as well.

This means checking the inside, too. Just because you don’t notice any issues from the outside, that doesn’t mean your RV isn’t in trouble. Water stains on the ceiling or towards the top of the walls are reliable signs that something has gone wrong.

Clean Regularly
Inspecting your RV’s roof is important, but so is keeping it nice and clean on a regular basis. Oftentimes, you can’t see the beginning of a problem forming, but cleaning your RV’s roof is a big step in stopping that issue in its tracks. Always be sure that you’re using products that have been specifically made for RVs.

Handle the Issue on Your Own
Sometimes, no matter what you do, problems arise. Fortunately, if it’s a leak, many will fall under the kinds of RV roof repairs that an amateur can handle on their own. You can save a lot of money this way, too. So, if you notice a leak, be sure to address it as soon as possible. Just like with cleaning supplies, though, you’ll want to make sure that you only use products that were made for an RV. For example, if you have a leak, you’ll want to use a sealant. Plenty are made for actual shingle-and-tar roofs, but that will only make matters worse in this scenario.

Fortunately, if your RV springs a leak, there’s plenty you can do to handle the matter on your own. Most people would like to avoid any RV roof repair with Liquid Roof as much as possible. As such, follow the above advice, and your roof will be less likely to need your help.

How to Maintain and Repair Your Metal Roof

With proper maintenance and timely repairs, metal roofs can last a very long time. These systems are designed to be long-lasting. Here are some maintenance and repair suggestions that will keep your roof looking like new, year after year.

Inspect and Clean Regularly:

Inspect your roof at regular intervals throughout the year. Seasonal inspections are a good idea to save your roofs from leaks if you live in an area where there are four distinct seasons. You should also inspect after storms. Hail, wind, snow and even severe rain can damage your roofing.

You should clean your roof at least once a year. You may only need to clean once a year to make sure that gutters are clear of leaves and other debris that could cause water to pool or ice dams to form. You can use soap and water to clean most metal roofing systems, but check the manufacturer’s specifications to be sure.

Ensure that Different Metals Do Not Touch:

If different kinds of metal touch and become wet, they will corrode. For example, copper pipes projecting through sheet metal will eventually rust at the point of contact. There are products on the market to prevent this kind of contact.

Repair Scratches:

Minor scratches might not seem like a big problem. But if they are not repaired, water will gather in the uneven surface and rusting will occur. To repair scratches, pour a small amount of mineral spirits on a clean cloth and use it to remove any debris from the scratches. After the area dries, take a small paintbrush and cover the scratched area with an appropriate color of metal touch-up paint. You can follow up with a clear coat to provide additional protection. Summer season is the best time to fix roof leaks problems and there are products available in the market like Liquid EPDM Rubber coatings and Elastomeric coatings.

Remove Rust:

Rusty spots should be sanded down first using a scrubbing cleanser and then light sandpaper. Do not use a wire brush. Once the rusted area is smooth, apply a metal primer. After the primer dries, use your touch up paint to improve the appearance and follow up with a clear coat if desired.

Repair Dents:

Dents may be popped out if you have access to the underside of the roof. Otherwise, you may need to call a professional. Repairing dents in metal roofing calls for the use of a stud welder. It’s not a job for the average do-it-yourselfer.

Consider a Protective Elastomeric Coating:

Elastomeric coatings can further increase the lifespan of the roofing system. Today’s Elastomeric roof coatings are available in an assortment of colors. They provide waterproofing, help to reduce sounds and can add to the beauty of your roof. You may not have to do all of these things, but the more time you spend protecting your roof form roof leaks, the longer it will last.

For product information or ordering Visit their site at https://www.epdmcoatings.com or their facebook page http://www.facebook.com/liquidepdm or call them at 855-281-0940.

The Effects of Environment on your Roof

The effects of environment on your roof are responsible for how it changes in appearance as the years go by. Just as your skin ages, so does your roof. One thing that ages both your skin and your roof is the sun.

The sun can cause the temperature on the roof to be 50-75 degrees higher than the temperature of the surrounding air. The heat alone can cause some roofing materials to blister and crack. It’s the main source of roof leaks.

In addition to the heat, the sun is a source of UV radiation. UV radiation has been shown to degrade the asphalt layers that make up your shingles. A protective layer of colored granules is used to reduce this effect. Liquid EPDM Rubber coatings are the best option to coat your roof shingles. Without that kind of roof coating the shingles would degrade very quickly. The use of the granules has added years to the lifespan of modern roofs.

Sudden changes in the roof temperature also speed the shingle aging process and roof starts leaking. Thunderstorms are common occurrences on hot days in many parts of the world. The temperature on the roof rises gradually as it is heated by the sun. When the rain starts to fall on the roof, the temperature can drop as much as 60 degrees almost instantly.

The wooden decking beneath the shingles expands with the heat and then contracts suddenly with the quick cooling. This places a strain on the shingles. As with other effects of environment on your roof, the aging process is relatively slow. But you have these sudden changes in temperature many times during a year. This is one of the reasons that shingles have a limited lifespan.

Moisture from rain and snow also has a negative effect on your shingles unrelated to the temperature change. Moisture causes wooden roof decking to expand. From the perspective of the shingles, the deck is moving. The movement loosens the shingles.

The effects of environment are worsened because of pollution and acid rain. Pollution hits the roof along with raindrops. Smoke from car exhausts, factories and other sources lands on the roof. The pollution causes the color of the shingles to darken, sometimes only in spots that are noticeable from the driveway.

Acid rain degrades the asphalt in shingles. The acid eats away at all parts of your roof gradually.

None of these changes occur suddenly. It may seem sudden if you get up on a ladder to clean the gutters and suddenly notice curling, blisters, cracks or stains. There is only so much you can do to minimize the effects of environment on your roof. Some aging is inevitable.

Summer is the best time to fix your roof leaks problems. You can get rid from such roofing problems by selecting the best roofing products like liquid epdm, liquid rubber and liquid roof coatings for your roof. Liquid Rubber is the only Liquid EPDM product in the world. Liquid roof coatings are also the best option for your RV Roof Repair problems.

For product information or ordering visit EPDM Coatings or call them at 855-281-0940.

Liquid EPDM Coatings are aftermarket roof sealants

A number of aftermarket roof sealants are available, including urethanes, acrylics and liquid rubber. Liquid EPDM rubber is by far the most durable of the sealants available and has the widest range of applications.

It is more water resistant than other rubbers, including neoprene. It is more resistant to swelling and has a wider range of acceptable temperatures. It can be applied directly to practically any roofing material other than asphalt and can even be used on wood that has been primed.

Liquids have an obvious advantage over sheets. Sheets have seams. Seam sealers eventually deteriorate and water gets through the seams and under the sheeting.

Liquid EPDM can be used on top of neoprene, although some pre-treatment of the surface is required. Just knowing that the liquid rubber is recommended for use on top of the other type of rubber should be an indication that the material is more durable.

Liquid EPDM can also be used on top of polyurethane after a light sanding. It is somewhat surprising that urethanes are still used as aftermarket roof sealants. It is known that the structure is damaged by UV light and that discoloration occurs relatively quickly. Anyone who has made the mistake of using urethane as a roof sealant should consider applying liquid EPDM to truly protect the roof.

The liquids can also be used to seal existing leaks. They are self-adhering and fill up tiny fractures that let water through. It is a good idea to use a thick coat and cover the entire surface instead of attempting to only cover the leaky area.

When covering the entire roof, the liquid rubber reduces heat buildup. Not only does the roof stay cooler, but the interior of the building or the vehicle will also stay cooler. This benefit may reduce heating costs and keep the occupants more comfortable.

Liquid EPDM has become the most popular choice for RV roofs, because of all the above-mentioned advantages. It extends the lifespan of the roof and requires less maintenance. It lasts up to three times longer than any other aftermarket RV camper rubber roof sealant and also reduces noise from rain.

As far as price goes, most sealants are similar in price. Depending on where you buy, EPDM may be a little more expensive, but because primers and additional coats are not usually necessary, and because it lasts so much longer, owners who choose this aftermarket roof sealant save money in the long run.