A Quick Look at EPDM Rubber Roof Installation Cost

Ask roofing experts and they will always say that there are many factors that impact the total cost of a roof installation or replacement. These factors can include the size of the roof, pitch of the roof, level of accessibility, and the materials chosen. In this article, we’ll explore the typical EPDM roof installation cost and take a look at the factors that affect its installation.

The Biggest Factors in Any EPDM Rubber Roof Installation Cost

When looking at a EPDM Rubber Roof installation cost (or any roofing installation, for that matter), the largest cost factor is the size of the roof. With flat and low-sloped rooftops, that usually means a relatively simple to calculate figure. As an illustration, roofing is often charged “per roofing square” and this is a ten foot by ten foot area, or one hundred square feet.

EPDM Rubber Roof

EPDM Rubber Roof

So, if your flat-roofed building has a forty thousand square foot size, it is actually 40 roofing squares. The best way to give yourself a relatively accurate estimate of the EPDM roof installation cost is to begin with the actual size of the roof to be covered or re-covered with the EPDM.

The Slope and the EPDM Roof Installation Cost

A real advantage to the use of EPDM is the fact that the complexity of a roof’s design usually boosts the cost of any work done relating to the roof. Large and steeply pitched roofs are very costly to deal with, and it is because the pace of the work is slower. Steeper pitches mean materials cannot remain nearby the worker and special steps are needed to ensure safety.

Flat roofs, however, are easily accessible, materials can be brought to the roof and left in place until the work begins, and worker safety is easier to manage because there is no slope or pitch to struggle against.

The DIY Element

Of course, in looking at the issue of EPDM roof installation cost, we cannot ignore that it is a process that is able to be done on a DIY basis if desired. One of the leading advantages of EPDM is that it does not require lots of specialized equipment or training. Not many commercial property owners will do a massive installation on their own, but they also do not need to hire a huge team of experts with heavy machinery and expensive skills to do the work.

And as to the most basic part of the costs of an EPDM roof – the actual materials themselves – EPDM is ranked as one of the most affordable. It requires very little in terms of materials with nothing more than the rolls of EPDM the adhesives used, and special materials like batten boards and special trims to complete the job properly. Keep in mind that the costs of the job, and the need for roofing experts, may boost the overall price. For instance, you may find that the plywood roofing beneath the old roof needs replacement. That can mean a dumpster at the site to take materials, the new boards and their installation, and any other materials will have to be figured into the price.

If there is any water damage, that too can boost the costs as you may need to replace structural issues or work around everything from skylights and vents to chimneys and more.

The good news is that EPDM has long had a reputation as one of the most affordable roofing options for residential and commercial buildings with low-slope or flat rooftops. Long-lasting, water and weather proof, and even environmentally friendly (they can be recycled whenever they are replaced), they are a good solution if you want a budget-friendly option for your building.

3 thoughts on “A Quick Look at EPDM Rubber Roof Installation Cost

      • Hi customer who have used this for decks etc have always put a indoor/outdoor carpet over it because it would eventually scratch the surface due to the foot traffic thankyou

Leave a Reply to Greg Kaz. Cancel reply

Your email address will not be published. Required fields are marked *