Metal of Honor

A New Roof For A fraction Of The Cost!
Manufacturing of Quality Roofing Products
The ONLY Product You will Need to Fix Your Leaks!
No Primer Needed and One Coat!


A New Roof For A fraction Of The Cost!


Skylight 911

Skylight 911

Skylight 911

rubber roof coating

Rated 4.5 /5 based on 55 customer reviews

Coverage: 25 sq Feet

Availability: In stock

Product description: Skylight 911 is a CLEAR coat that provides extremely effective protection for your skylights.

Skylight 911 is a CLEAR coat that provides extremely effective protection for your skylights. As your skylight’s age strands becomes exposed, allowing dirt to form and reducing light emission. Skylight 911 will protect against age oxidization chalking that occurs on skylights. Our product is a one-component moisture-cure system with superior adhesion to skylights. It gives protection against harsh wind, rain, snow as well as UV degradation. Skylight-911 is thermally stable and resists cracking and peeling due to weather extremes and ultraviolet exposure. Skylight 911 is great to bring back the life and color of your old skylights but better to protect them from aging in the first place. Will not work on vinyl.

Type of Applications:

  • Clear Skylights
  • For all skylights (Not to be used on vinyl)

Surface Preparation:

The surface must be free of any oils, moisture, soil or other contaminates that may interfere with good adhesion. Carefully remove any loose material from the surface with a wire brush or scraper. Oil and grease should also be removed with solvents or an appropriate detergent cleaner. In many cases, high pressure water blast will be sufficient to prepare the surface.

Application Temperatures:

For best results, the temperature of the ambient air and the substrate should be within a range of 50°-100°F. For best application, the product should be at a minimum of 60°F.

Application Methods:

Skylight 911 can be applied by brush, or roller.


Color   Clear
Coverage Rate   25 sq ft. Quart
Wet Mil Thickness  10 – 12 mils
Dry Mil Thickness   4 – 5 mils
Flashpoint   101°F
Specific Gravity   864
Weight (lb./gal.)   7.2
Solids (% by Weight)   37.1 ±1%
Viscosity @ 78°   1500 cps.
Drying Time   1 – 3 hours
Elongation ASTM-D-412 400%
Tensile Strength ASTM-D-412 1520 PSI
Permeance (10 mils) ASTM-E-96 0.166 perms

Additional information

Unit Quart

Handling & Storage:

Skylight-911 contains a blend of solvents considered combustible by D.O.T. and O.S.H.A. standards. It should be used and stored away from flames, in a well-ventilated atmosphere. Avoid prolonged breathing of vapors and prevent contact with eyes. Read all label information and precautions before using.

The specifications, properties and performance of materials described herein are based on information believed to be reliable. Unless otherwise expressly provided in written contract, the products discussed are sold without conditions or warranties, expressed or implied. Product specifications are subject to change without notice.